Wetting angle and infiltration velocity of Zr base bulk metallic glass composite

Xidong Hui; Jialing Yu; Meiling Wang; Wei Dong; Guoliang Chen

doi:10.1016/j.intermet.2006.01.037

Wetting angle and infiltration velocity of Zr base bulk metallic glass composite

Xidong Hui^*
, Jialing Yu
, Meiling Wang
, Wei Dong
, Guoliang Chen

^*Corresponding author for this work

University of Science and Technology Beijing

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

Abstract

The contact angles of Zr₄₇Ti₁₃Cu₁₁Ni₁₀Be₁₆Nb₃ alloy on tungsten substrate were measured by sessile drop technique at the temperature range from 1023 to 1323 K and different processed time. Based on the morphology of the melt drop, the surface tension as function of processing temperature and holding time was obtained. Diffusion band was observed at the fringe of metallic drop, which confirms that the wetting between the melt and tungsten belongs to reactive wetting. The relationship between the flow velocity of melt and processing parameters, such as infiltration pressure, volume fraction of fibers and the filtration length, was calculated comprehensively.

Original language	English
Pages (from-to)	931-935
Number of pages	5
Journal	Intermetallics
Volume	14
Issue number	8-9
DOIs	https://doi.org/10.1016/j.intermet.2006.01.037
State	Published - Aug 2006
Externally published	Yes

Keywords

A. Composites
B. Glasses, metallic
C. Joining

Access to Document

10.1016/j.intermet.2006.01.037

Cite this

@article{a6738aa2fad243c8815ecb07a9615f7b,

title = "Wetting angle and infiltration velocity of Zr base bulk metallic glass composite",

abstract = "The contact angles of Zr47Ti13Cu11Ni10Be16Nb3 alloy on tungsten substrate were measured by sessile drop technique at the temperature range from 1023 to 1323 K and different processed time. Based on the morphology of the melt drop, the surface tension as function of processing temperature and holding time was obtained. Diffusion band was observed at the fringe of metallic drop, which confirms that the wetting between the melt and tungsten belongs to reactive wetting. The relationship between the flow velocity of melt and processing parameters, such as infiltration pressure, volume fraction of fibers and the filtration length, was calculated comprehensively.",

keywords = "A. Composites, B. Glasses, metallic, C. Joining",

author = "Xidong Hui and Jialing Yu and Meiling Wang and Wei Dong and Guoliang Chen",

year = "2006",

month = aug,

doi = "10.1016/j.intermet.2006.01.037",

language = "英语",

volume = "14",

pages = "931--935",

journal = "Intermetallics",

issn = "0966-9795",

publisher = "Elsevier Ltd",

number = "8-9",

}

TY - JOUR

T1 - Wetting angle and infiltration velocity of Zr base bulk metallic glass composite

AU - Hui, Xidong

AU - Yu, Jialing

AU - Wang, Meiling

AU - Dong, Wei

AU - Chen, Guoliang

PY - 2006/8

Y1 - 2006/8

N2 - The contact angles of Zr47Ti13Cu11Ni10Be16Nb3 alloy on tungsten substrate were measured by sessile drop technique at the temperature range from 1023 to 1323 K and different processed time. Based on the morphology of the melt drop, the surface tension as function of processing temperature and holding time was obtained. Diffusion band was observed at the fringe of metallic drop, which confirms that the wetting between the melt and tungsten belongs to reactive wetting. The relationship between the flow velocity of melt and processing parameters, such as infiltration pressure, volume fraction of fibers and the filtration length, was calculated comprehensively.

AB - The contact angles of Zr47Ti13Cu11Ni10Be16Nb3 alloy on tungsten substrate were measured by sessile drop technique at the temperature range from 1023 to 1323 K and different processed time. Based on the morphology of the melt drop, the surface tension as function of processing temperature and holding time was obtained. Diffusion band was observed at the fringe of metallic drop, which confirms that the wetting between the melt and tungsten belongs to reactive wetting. The relationship between the flow velocity of melt and processing parameters, such as infiltration pressure, volume fraction of fibers and the filtration length, was calculated comprehensively.

KW - A. Composites

KW - B. Glasses, metallic

KW - C. Joining

UR - https://www.scopus.com/pages/publications/33646149145

U2 - 10.1016/j.intermet.2006.01.037

DO - 10.1016/j.intermet.2006.01.037

M3 - 文章

AN - SCOPUS:33646149145

SN - 0966-9795

VL - 14

SP - 931

EP - 935

JO - Intermetallics

JF - Intermetallics

IS - 8-9

ER -

Wetting angle and infiltration velocity of Zr base bulk metallic glass composite

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this