Skip to main navigation Skip to search Skip to main content

Ultrahigh energy storage density lead-free multilayers by controlled electrical homogeneity

  • Ge Wang
  • , Jinglei Li
  • , Xun Zhang
  • , Zhongming Fan
  • , Fan Yang
  • , Antonio Feteira
  • , Di Zhou
  • , Derek C. Sinclair
  • , Tao Ma
  • , Xiaoli Tan
  • , Dawei Wang
  • , Ian M. Reaney
  • University of Sheffield
  • Xi'an Jiaotong University
  • University of Manchester
  • Iowa State University
  • Sheffield Hallam University
  • United States Department of Energy

Research output: Contribution to journalArticlepeer-review

Abstract

Ultrahigh discharge energy density (W dis = 10.5 J cm -3 ) and efficiency (η = 87%) have been obtained in doped BiFeO 3 -BaTiO 3 ceramic multilayers by achieving an electrically rather than chemically homogeneous microstructure. Back scattered scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy mapping of (0.7-x)BiFeO 3 -0.3BaTiO 3 -xNd(Zn 0.5 Zr 0.5 )O 3 (0.05 ≤ x ≤ 0.10) ceramics revealed a core-shell grain structure which switched from a bright to dark contrast as x increased. Compositions with x = 0.08 were at the point of cross over between these two manifestations of core-shell contrast. Dielectric measurements together with the absence of macrodomains in diffraction contrast TEM images suggested that compositions with x = 0.08 exhibited relaxor behaviour within both the core and shell regions. Impedance spectroscopy demonstrated that, despite being chemical dissimilar, the grains were electrically homogeneous and insulating with little evidence of conductive cores. Multilayers of x = 0.08 had enhanced breakdown strength, E BDS > 700 kV cm -1 and a slim hysteresis loop which resulted in large W dis and high η which were temperature stable to <15% from 25 to 150 °C.

Original languageEnglish
Pages (from-to)582-588
Number of pages7
JournalEnergy and Environmental Science
Volume12
Issue number2
DOIs
StatePublished - Feb 2019
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'Ultrahigh energy storage density lead-free multilayers by controlled electrical homogeneity'. Together they form a unique fingerprint.

Cite this