TIG焊接参数对全息干涉条纹的影响

Chenglei Fan; Chao Chen; Sanbao Lin; Chunli Yang; Zhongju Di

doi:10.12073/j.hjxb.20190115004

TIG焊接参数对全息干涉条纹的影响

Translated title of the contribution: Effect of welding parameters on holographic interferometric fringe in TIG

Chenglei Fan
, Chao Chen
, Sanbao Lin
, Chunli Yang
, Zhongju Di

School of Materials Science and Engineering

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

Abstract

The effect of welding current, welding arc length and gas flow rate on holographic interference fringe was investigated. During holographic interference test, the reasonable range of the welding parameters is presented, and the calculation of the holographic interferometric arc temperature field is enumerated. the results shown that when the welding current less than100 A, welding arc length 4 ~ 14 mm and protecting air flow less than 6 L/min, the clear of holographic interference fringes can be obtain. The influence degree of welding current (R₁), welding arc length (R₂) and the protection of gas flow (R₃) on the number of interference fringes (N₁) on the tungsten tip, the center of circle transverse diameter (d₁) and that of the radial diameter (d₂) are R₂ > R₁ > R₃, R₂ > R₃ > R₁ and R₂ > R₁ > R₃.

Translated title of the contribution	Effect of welding parameters on holographic interferometric fringe in TIG
Original language	Chinese (Traditional)
Pages (from-to)	1-5
Number of pages	5
Journal	Hanjie Xuebao/Transactions of the China Welding Institution
Volume	41
Issue number	2
DOIs	https://doi.org/10.12073/j.hjxb.20190115004
State	Published - 25 Feb 2020

Access to Document

10.12073/j.hjxb.20190115004

Cite this

@article{c943f09740bc4ed784049bac6233cd5d,

title = "TIG焊接参数对全息干涉条纹的影响",

abstract = "The effect of welding current, welding arc length and gas flow rate on holographic interference fringe was investigated. During holographic interference test, the reasonable range of the welding parameters is presented, and the calculation of the holographic interferometric arc temperature field is enumerated. the results shown that when the welding current less than100 A, welding arc length 4 \textasciitilde{} 14 mm and protecting air flow less than 6 L/min, the clear of holographic interference fringes can be obtain. The influence degree of welding current (R1), welding arc length (R2) and the protection of gas flow (R3) on the number of interference fringes (N1) on the tungsten tip, the center of circle transverse diameter (d1) and that of the radial diameter (d2) are R2 > R1 > R3, R2 > R3 > R1 and R2 > R1 > R3.",

keywords = "Arc length, Holographic interferometric, Plasma, Range analysis, TIG",

author = "Chenglei Fan and Chao Chen and Sanbao Lin and Chunli Yang and Zhongju Di",

year = "2020",

month = feb,

day = "25",

doi = "10.12073/j.hjxb.20190115004",

language = "繁体中文",

volume = "41",

pages = "1--5",

journal = "Hanjie Xuebao/Transactions of the China Welding Institution",

issn = "0253-360X",

publisher = "Harbin Research Institute of Welding",

number = "2",

}

TY - JOUR

T1 - TIG焊接参数对全息干涉条纹的影响

AU - Fan, Chenglei

AU - Chen, Chao

AU - Lin, Sanbao

AU - Yang, Chunli

AU - Di, Zhongju

PY - 2020/2/25

Y1 - 2020/2/25

N2 - The effect of welding current, welding arc length and gas flow rate on holographic interference fringe was investigated. During holographic interference test, the reasonable range of the welding parameters is presented, and the calculation of the holographic interferometric arc temperature field is enumerated. the results shown that when the welding current less than100 A, welding arc length 4 ~ 14 mm and protecting air flow less than 6 L/min, the clear of holographic interference fringes can be obtain. The influence degree of welding current (R1), welding arc length (R2) and the protection of gas flow (R3) on the number of interference fringes (N1) on the tungsten tip, the center of circle transverse diameter (d1) and that of the radial diameter (d2) are R2 > R1 > R3, R2 > R3 > R1 and R2 > R1 > R3.

AB - The effect of welding current, welding arc length and gas flow rate on holographic interference fringe was investigated. During holographic interference test, the reasonable range of the welding parameters is presented, and the calculation of the holographic interferometric arc temperature field is enumerated. the results shown that when the welding current less than100 A, welding arc length 4 ~ 14 mm and protecting air flow less than 6 L/min, the clear of holographic interference fringes can be obtain. The influence degree of welding current (R1), welding arc length (R2) and the protection of gas flow (R3) on the number of interference fringes (N1) on the tungsten tip, the center of circle transverse diameter (d1) and that of the radial diameter (d2) are R2 > R1 > R3, R2 > R3 > R1 and R2 > R1 > R3.

KW - Arc length

KW - Holographic interferometric

KW - Plasma

KW - Range analysis

KW - TIG

UR - https://www.scopus.com/pages/publications/85087771363

U2 - 10.12073/j.hjxb.20190115004

DO - 10.12073/j.hjxb.20190115004

M3 - 文章

AN - SCOPUS:85087771363

SN - 0253-360X

VL - 41

SP - 1

EP - 5

JO - Hanjie Xuebao/Transactions of the China Welding Institution

JF - Hanjie Xuebao/Transactions of the China Welding Institution

IS - 2

ER -

TIG焊接参数对全息干涉条纹的影响

Abstract

Access to Document

Other files and links

Fingerprint

Cite this