The modeling and control of VSCF DFIG wind power generation based on PSCAD

Yongfeng Ren; Limin Cao; Jie Zhou; Lei Liu; Mingming Zhang; Hanshan Li

doi:10.1109/ICICIP.2010.5564163

The modeling and control of VSCF DFIG wind power generation based on PSCAD

Yongfeng Ren^*
, Limin Cao
, Jie Zhou
, Lei Liu
, Mingming Zhang
, Hanshan Li

^*Corresponding author for this work

Inner Mongolia University of Technology
Inner Mongolia Power Exploration and design Institute
CAS - Institute of Engineering Thermophysics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

The AC-excited doubly-fed induction generator (DFIG) has become one of the main generators in variable speed constant frequency (VSCF) wind power generation systems. The wind turbine model and the dynamic mathematical model of DFIG are derived. The control of the rotor current inner loop and the rotating speed outer loop are designed based on internal model control (IMC) strategies, respectively. A complete 2MW variable speed constant frequency (VSCF) DFIG wind power generation system model is developed based on PSCAD/EMTDC. The simulation results show that the system has fast dynamic response under various run conditions and can operate at sub-synchronous speed and super-synchronous speed.

Original language	English
Title of host publication	Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
Pages	24-28
Number of pages	5
Edition	PART 1
DOIs	https://doi.org/10.1109/ICICIP.2010.5564163
State	Published - 2010
Externally published	Yes
Event	2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010 - Dalian, China Duration: 13 Aug 2010 → 15 Aug 2010

Publication series

Name	Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
Number	PART 1

Conference

Conference	2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
Country/Territory	China
City	Dalian
Period	13/08/10 → 15/08/10

Access to Document

10.1109/ICICIP.2010.5564163

Cite this

Ren, Y., Cao, L., Zhou, J., Liu, L., Zhang, M., & Li, H. (2010). The modeling and control of VSCF DFIG wind power generation based on PSCAD. In Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010 (PART 1 ed., pp. 24-28). Article 5564163 (Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010; No. PART 1). https://doi.org/10.1109/ICICIP.2010.5564163

Ren, Yongfeng ; Cao, Limin ; Zhou, Jie et al. / The modeling and control of VSCF DFIG wind power generation based on PSCAD. Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010. PART 1. ed. 2010. pp. 24-28 (Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010; PART 1).

@inproceedings{edeaedf88b744e51b3946aee1a534cfd,

title = "The modeling and control of VSCF DFIG wind power generation based on PSCAD",

abstract = "The AC-excited doubly-fed induction generator (DFIG) has become one of the main generators in variable speed constant frequency (VSCF) wind power generation systems. The wind turbine model and the dynamic mathematical model of DFIG are derived. The control of the rotor current inner loop and the rotating speed outer loop are designed based on internal model control (IMC) strategies, respectively. A complete 2MW variable speed constant frequency (VSCF) DFIG wind power generation system model is developed based on PSCAD/EMTDC. The simulation results show that the system has fast dynamic response under various run conditions and can operate at sub-synchronous speed and super-synchronous speed.",

author = "Yongfeng Ren and Limin Cao and Jie Zhou and Lei Liu and Mingming Zhang and Hanshan Li",

year = "2010",

doi = "10.1109/ICICIP.2010.5564163",

language = "英语",

isbn = "9781424470488",

series = "Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010",

number = "PART 1",

pages = "24--28",

booktitle = "Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010",

edition = "PART 1",

note = "2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010 ; Conference date: 13-08-2010 Through 15-08-2010",

}

Ren, Y, Cao, L, Zhou, J, Liu, L, Zhang, M & Li, H 2010, The modeling and control of VSCF DFIG wind power generation based on PSCAD. in Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010. PART 1 edn, 5564163, Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010, no. PART 1, pp. 24-28, 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010, Dalian, China, 13/08/10. https://doi.org/10.1109/ICICIP.2010.5564163

The modeling and control of VSCF DFIG wind power generation based on PSCAD. / Ren, Yongfeng; Cao, Limin; Zhou, Jie et al.
Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010. PART 1. ed. 2010. p. 24-28 5564163 (Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010; No. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The modeling and control of VSCF DFIG wind power generation based on PSCAD

AU - Ren, Yongfeng

AU - Cao, Limin

AU - Zhou, Jie

AU - Liu, Lei

AU - Zhang, Mingming

AU - Li, Hanshan

PY - 2010

Y1 - 2010

N2 - The AC-excited doubly-fed induction generator (DFIG) has become one of the main generators in variable speed constant frequency (VSCF) wind power generation systems. The wind turbine model and the dynamic mathematical model of DFIG are derived. The control of the rotor current inner loop and the rotating speed outer loop are designed based on internal model control (IMC) strategies, respectively. A complete 2MW variable speed constant frequency (VSCF) DFIG wind power generation system model is developed based on PSCAD/EMTDC. The simulation results show that the system has fast dynamic response under various run conditions and can operate at sub-synchronous speed and super-synchronous speed.

AB - The AC-excited doubly-fed induction generator (DFIG) has become one of the main generators in variable speed constant frequency (VSCF) wind power generation systems. The wind turbine model and the dynamic mathematical model of DFIG are derived. The control of the rotor current inner loop and the rotating speed outer loop are designed based on internal model control (IMC) strategies, respectively. A complete 2MW variable speed constant frequency (VSCF) DFIG wind power generation system model is developed based on PSCAD/EMTDC. The simulation results show that the system has fast dynamic response under various run conditions and can operate at sub-synchronous speed and super-synchronous speed.

UR - https://www.scopus.com/pages/publications/78649256835

U2 - 10.1109/ICICIP.2010.5564163

DO - 10.1109/ICICIP.2010.5564163

M3 - 会议稿件

AN - SCOPUS:78649256835

SN - 9781424470488

T3 - Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010

SP - 24

EP - 28

BT - Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010

T2 - 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010

Y2 - 13 August 2010 through 15 August 2010

ER -

Ren Y, Cao L, Zhou J, Liu L, Zhang M, Li H. The modeling and control of VSCF DFIG wind power generation based on PSCAD. In Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010. PART 1 ed. 2010. p. 24-28. 5564163. (Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010; PART 1). doi: 10.1109/ICICIP.2010.5564163

The modeling and control of VSCF DFIG wind power generation based on PSCAD

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this