The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites

Z. Wu; P. C. Kang; G. H. Wu; Q. Guo; G. Q. Chen; L. T. Jiang

doi:10.1016/j.msea.2011.11.088

The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites

Z. Wu^*
, P. C. Kang
, G. H. Wu
, Q. Guo
, G. Q. Chen
, L. T. Jiang

^*Corresponding author for this work

Harbin Institute of Technology
College of Mechanical and Electrical Engineering, Northeast Forestry University

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

Abstract

W_f/Cu composites, W_f(Ni)/Cu composites and W_f/Cu₈₂Al₁₀Fe₄Ni₄ composites were fabricated by penetrating casting method. Bending strength and dynamic compressive strength of the composites were tested. Fracture mode and microstructure were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM). The result showed that the interface strength of W_f(Ni)/Cu composites and W_f/Cu₈₂Al₁₀Fe₄Ni₄ composites were higher than W_f/Cu composites. In W_f(Ni)/Cu composites, nickel plated on the surface of tungsten fibers has diffused into the inner of tungsten fibers, and a large number of tungsten grains and Ni₄W intermetallic compounds appeared within tungsten fibers. In W_f/Cu₈₂Al₁₀Fe₄Ni₄ composites, Fe-Ni solid solutions precipitated on the interface between matrix and tungsten fibers, and tungsten has diffused into the Fe-Ni solid solutions. Dynamic compression test showed that the dynamic compressive strength and plasticity of W_f/Cu₈₂Al₁₀Fe₄Ni₄ composites were highest among the three kinds of composites.

Original language	English
Pages (from-to)	45-48
Number of pages	4
Journal	Materials Science and Engineering: A
Volume	536
DOIs	https://doi.org/10.1016/j.msea.2011.11.088
State	Published - 28 Feb 2012
Externally published	Yes

Keywords

Dynamic compression test
Interface strength
Three-point bending test
Tungsten fiber reinforced copper matrix composites

Access to Document

10.1016/j.msea.2011.11.088

Cite this

@article{10a9d88d31db49b18932c5e7ca7ab423,

title = "The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites",

abstract = "Wf/Cu composites, Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were fabricated by penetrating casting method. Bending strength and dynamic compressive strength of the composites were tested. Fracture mode and microstructure were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM). The result showed that the interface strength of Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were higher than Wf/Cu composites. In Wf(Ni)/Cu composites, nickel plated on the surface of tungsten fibers has diffused into the inner of tungsten fibers, and a large number of tungsten grains and Ni4W intermetallic compounds appeared within tungsten fibers. In Wf/Cu82Al10Fe4Ni4 composites, Fe-Ni solid solutions precipitated on the interface between matrix and tungsten fibers, and tungsten has diffused into the Fe-Ni solid solutions. Dynamic compression test showed that the dynamic compressive strength and plasticity of Wf/Cu82Al10Fe4Ni4 composites were highest among the three kinds of composites.",

keywords = "Dynamic compression test, Interface strength, Three-point bending test, Tungsten fiber reinforced copper matrix composites",

author = "Z. Wu and Kang, \{P. C.\} and Wu, \{G. H.\} and Q. Guo and Chen, \{G. Q.\} and Jiang, \{L. T.\}",

year = "2012",

month = feb,

day = "28",

doi = "10.1016/j.msea.2011.11.088",

language = "英语",

volume = "536",

pages = "45--48",

journal = "Materials Science and Engineering: A",

issn = "0921-5093",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites

AU - Wu, Z.

AU - Kang, P. C.

AU - Wu, G. H.

AU - Guo, Q.

AU - Chen, G. Q.

AU - Jiang, L. T.

PY - 2012/2/28

Y1 - 2012/2/28

N2 - Wf/Cu composites, Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were fabricated by penetrating casting method. Bending strength and dynamic compressive strength of the composites were tested. Fracture mode and microstructure were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM). The result showed that the interface strength of Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were higher than Wf/Cu composites. In Wf(Ni)/Cu composites, nickel plated on the surface of tungsten fibers has diffused into the inner of tungsten fibers, and a large number of tungsten grains and Ni4W intermetallic compounds appeared within tungsten fibers. In Wf/Cu82Al10Fe4Ni4 composites, Fe-Ni solid solutions precipitated on the interface between matrix and tungsten fibers, and tungsten has diffused into the Fe-Ni solid solutions. Dynamic compression test showed that the dynamic compressive strength and plasticity of Wf/Cu82Al10Fe4Ni4 composites were highest among the three kinds of composites.

AB - Wf/Cu composites, Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were fabricated by penetrating casting method. Bending strength and dynamic compressive strength of the composites were tested. Fracture mode and microstructure were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM). The result showed that the interface strength of Wf(Ni)/Cu composites and Wf/Cu82Al10Fe4Ni4 composites were higher than Wf/Cu composites. In Wf(Ni)/Cu composites, nickel plated on the surface of tungsten fibers has diffused into the inner of tungsten fibers, and a large number of tungsten grains and Ni4W intermetallic compounds appeared within tungsten fibers. In Wf/Cu82Al10Fe4Ni4 composites, Fe-Ni solid solutions precipitated on the interface between matrix and tungsten fibers, and tungsten has diffused into the Fe-Ni solid solutions. Dynamic compression test showed that the dynamic compressive strength and plasticity of Wf/Cu82Al10Fe4Ni4 composites were highest among the three kinds of composites.

KW - Dynamic compression test

KW - Interface strength

KW - Three-point bending test

KW - Tungsten fiber reinforced copper matrix composites

UR - https://www.scopus.com/pages/publications/84862815757

U2 - 10.1016/j.msea.2011.11.088

DO - 10.1016/j.msea.2011.11.088

M3 - 文章

AN - SCOPUS:84862815757

SN - 0921-5093

VL - 536

SP - 45

EP - 48

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

ER -

The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this