The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions

In this paper, Al₂O₃-13 wt.% TiO₂ coatings formed via a plasma spray approach using reconstituted nanosized Al₂O₃ and TiO₂ powder feeds are described. Effects of various plasma spray conditions on the microstructure, grain size, phase content and microhardness of the coatings have been evaluated. It is found that phase transformation of nanosized Al₂O₃ and TiO₂ during heat treating, sintering and thermal spraying is, in general, identical to that of micrometer-sized counterparts. Furthermore, the particle temperature during thermal spray could be divided into three regimes, i.e. low, intermediate and high temperature regimes, according to the characteristics of the coating produced from the nanopowder. The hardness and density of the coating increase with the spray temperature. The phase content and grain size of the coating also exhibits a strong dependency on the spray temperature. The coating sprayed using nanopowder feed displays a better wear resistance than the counterpart sprayed using commercial coarse-grained powder feed. The observed phenomena are discussed in terms of physics of thermal spraying, mechanisms of coating growth and phase transformation of the oxides. (C) 2000 Elsevier Science S.A. All rights reserved.