The deformation of B4C particle in the B4C/2024Al composites after high velocity impact

Zhisong Zhou; Gaohui Wu; Longtao Jiang; Zhongguo Xu

doi:10.1016/j.micron.2014.07.006

The deformation of B₄C particle in the B₄C/2024Al composites after high velocity impact

Zhisong Zhou
, Gaohui Wu^*
, Longtao Jiang
, Zhongguo Xu

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Abstract

In the present work, B₄C/2024Al composites with volume fraction of 45% were prepared by a pressure infiltration method. The microstructure of the crater bottom of B₄C/2024Al composite after impact was characterized by transmission electron microscope (TEM), which indicated that recovery and dynamic recrystallization generated in Al matrix, and the grain size distribution was about from dozens of nanometer to 200nm. Furthermore, the plastic deformation was observed in B₄C ceramic, which led to the transformation from monocrystal to polycrystal ceramic grains. The boundary observed in this work was high-angle grain boundary and the two grains at the boundary had an orientation difference of 30°.

Original language	English
Pages (from-to)	107-111
Number of pages	5
Journal	Micron
Volume	67
DOIs	https://doi.org/10.1016/j.micron.2014.07.006
State	Published - Dec 2014
Externally published	Yes

Keywords

Crystal structure
Focused ion beam (FIB)
Impact
Metal matrix composites, Microstructure
Plastic deformation

Access to Document

10.1016/j.micron.2014.07.006

Cite this

@article{549e1fbbd09744d594e202f5f34643c2,

title = "The deformation of B4C particle in the B4C/2024Al composites after high velocity impact",

abstract = "In the present work, B4C/2024Al composites with volume fraction of 45\% were prepared by a pressure infiltration method. The microstructure of the crater bottom of B4C/2024Al composite after impact was characterized by transmission electron microscope (TEM), which indicated that recovery and dynamic recrystallization generated in Al matrix, and the grain size distribution was about from dozens of nanometer to 200nm. Furthermore, the plastic deformation was observed in B4C ceramic, which led to the transformation from monocrystal to polycrystal ceramic grains. The boundary observed in this work was high-angle grain boundary and the two grains at the boundary had an orientation difference of 30°.",

keywords = "Crystal structure, Focused ion beam (FIB), Impact, Metal matrix composites, Microstructure, Plastic deformation",

author = "Zhisong Zhou and Gaohui Wu and Longtao Jiang and Zhongguo Xu",

year = "2014",

month = dec,

doi = "10.1016/j.micron.2014.07.006",

language = "英语",

volume = "67",

pages = "107--111",

journal = "Micron",

issn = "0968-4328",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - The deformation of B4C particle in the B4C/2024Al composites after high velocity impact

AU - Zhou, Zhisong

AU - Wu, Gaohui

AU - Jiang, Longtao

AU - Xu, Zhongguo

PY - 2014/12

Y1 - 2014/12

N2 - In the present work, B4C/2024Al composites with volume fraction of 45% were prepared by a pressure infiltration method. The microstructure of the crater bottom of B4C/2024Al composite after impact was characterized by transmission electron microscope (TEM), which indicated that recovery and dynamic recrystallization generated in Al matrix, and the grain size distribution was about from dozens of nanometer to 200nm. Furthermore, the plastic deformation was observed in B4C ceramic, which led to the transformation from monocrystal to polycrystal ceramic grains. The boundary observed in this work was high-angle grain boundary and the two grains at the boundary had an orientation difference of 30°.

AB - In the present work, B4C/2024Al composites with volume fraction of 45% were prepared by a pressure infiltration method. The microstructure of the crater bottom of B4C/2024Al composite after impact was characterized by transmission electron microscope (TEM), which indicated that recovery and dynamic recrystallization generated in Al matrix, and the grain size distribution was about from dozens of nanometer to 200nm. Furthermore, the plastic deformation was observed in B4C ceramic, which led to the transformation from monocrystal to polycrystal ceramic grains. The boundary observed in this work was high-angle grain boundary and the two grains at the boundary had an orientation difference of 30°.

KW - Crystal structure

KW - Focused ion beam (FIB)

KW - Impact

KW - Metal matrix composites, Microstructure

KW - Plastic deformation

UR - https://www.scopus.com/pages/publications/84907357537

U2 - 10.1016/j.micron.2014.07.006

DO - 10.1016/j.micron.2014.07.006

M3 - 文章

AN - SCOPUS:84907357537

SN - 0968-4328

VL - 67

SP - 107

EP - 111

JO - Micron

JF - Micron

ER -

The deformation of B₄C particle in the B₄C/2024Al composites after high velocity impact

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this