Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model

Fei Yang; Yimeng Gao; Yuefeng Li; Lvyin Cai; Jianan Liu; Yanquan Geng; Bo Peng

doi:10.1109/ICEED59801.2023.10264040

Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model

Fei Yang^*
, Yimeng Gao
, Yuefeng Li
, Lvyin Cai
, Jianan Liu
, Yanquan Geng
, Bo Peng

^*Corresponding author for this work

School of Mechatronics Engineering, Harbin Institute of Technology
School of Astronautics, Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Non-traditional machining course is one of the important components of the metalworking practice course system. In response to the problem of the single teaching mode in the current non-traditional machining experiments, based on the five-star teaching mode, digital transformation is explored in teaching, task-driven to stimulate students' intrinsic motivation, and through interactive teaching mode, practicality and flexibility of the experimental segment are strengthened to better train students' innovative thinking and practical skills, and to solidly carry out the experimental teaching component in the engineering talent training system.

Original language	English
Title of host publication	2023 IEEE 12th International Conference on Engineering Education, ICEED 2023
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	139-142
Number of pages	4
ISBN (Electronic)	9798350307429
DOIs	https://doi.org/10.1109/ICEED59801.2023.10264040
State	Published - 2023
Externally published	Yes
Event	12th IEEE International Conference on Engineering Education, ICEED 2023 - Shah Alam, Malaysia Duration: 29 Aug 2023 → 30 Aug 2023

Publication series

Name	2023 IEEE 12th International Conference on Engineering Education, ICEED 2023

Conference

Conference	12th IEEE International Conference on Engineering Education, ICEED 2023
Country/Territory	Malaysia
City	Shah Alam
Period	29/08/23 → 30/08/23

Keywords

5 stars principles of instruction
digital transformation
non-traditional machining
teaching design and practice

Access to Document

10.1109/ICEED59801.2023.10264040

Cite this

Yang, F., Gao, Y., Li, Y., Cai, L., Liu, J., Geng, Y., & Peng, B. (2023). Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model. In 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023 (pp. 139-142). (2023 IEEE 12th International Conference on Engineering Education, ICEED 2023). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEED59801.2023.10264040

Yang, Fei ; Gao, Yimeng ; Li, Yuefeng et al. / Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model. 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023. Institute of Electrical and Electronics Engineers Inc., 2023. pp. 139-142 (2023 IEEE 12th International Conference on Engineering Education, ICEED 2023).

@inproceedings{a2547e7dd74a409e8fa6b676d2198439,

title = "Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model",

abstract = "Non-traditional machining course is one of the important components of the metalworking practice course system. In response to the problem of the single teaching mode in the current non-traditional machining experiments, based on the five-star teaching mode, digital transformation is explored in teaching, task-driven to stimulate students' intrinsic motivation, and through interactive teaching mode, practicality and flexibility of the experimental segment are strengthened to better train students' innovative thinking and practical skills, and to solidly carry out the experimental teaching component in the engineering talent training system.",

keywords = "5 stars principles of instruction, digital transformation, non-traditional machining, teaching design and practice",

author = "Fei Yang and Yimeng Gao and Yuefeng Li and Lvyin Cai and Jianan Liu and Yanquan Geng and Bo Peng",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 12th IEEE International Conference on Engineering Education, ICEED 2023 ; Conference date: 29-08-2023 Through 30-08-2023",

year = "2023",

doi = "10.1109/ICEED59801.2023.10264040",

language = "英语",

series = "2023 IEEE 12th International Conference on Engineering Education, ICEED 2023",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "139--142",

booktitle = "2023 IEEE 12th International Conference on Engineering Education, ICEED 2023",

address = "美国",

}

Yang, F, Gao, Y, Li, Y, Cai, L, Liu, J, Geng, Y & Peng, B 2023, Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model. in 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023. 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023, Institute of Electrical and Electronics Engineers Inc., pp. 139-142, 12th IEEE International Conference on Engineering Education, ICEED 2023, Shah Alam, Malaysia, 29/08/23. https://doi.org/10.1109/ICEED59801.2023.10264040

Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model. / Yang, Fei; Gao, Yimeng; Li, Yuefeng et al.
2023 IEEE 12th International Conference on Engineering Education, ICEED 2023. Institute of Electrical and Electronics Engineers Inc., 2023. p. 139-142 (2023 IEEE 12th International Conference on Engineering Education, ICEED 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model

AU - Yang, Fei

AU - Gao, Yimeng

AU - Li, Yuefeng

AU - Cai, Lvyin

AU - Liu, Jianan

AU - Geng, Yanquan

AU - Peng, Bo

PY - 2023

Y1 - 2023

N2 - Non-traditional machining course is one of the important components of the metalworking practice course system. In response to the problem of the single teaching mode in the current non-traditional machining experiments, based on the five-star teaching mode, digital transformation is explored in teaching, task-driven to stimulate students' intrinsic motivation, and through interactive teaching mode, practicality and flexibility of the experimental segment are strengthened to better train students' innovative thinking and practical skills, and to solidly carry out the experimental teaching component in the engineering talent training system.

AB - Non-traditional machining course is one of the important components of the metalworking practice course system. In response to the problem of the single teaching mode in the current non-traditional machining experiments, based on the five-star teaching mode, digital transformation is explored in teaching, task-driven to stimulate students' intrinsic motivation, and through interactive teaching mode, practicality and flexibility of the experimental segment are strengthened to better train students' innovative thinking and practical skills, and to solidly carry out the experimental teaching component in the engineering talent training system.

KW - 5 stars principles of instruction

KW - digital transformation

KW - non-traditional machining

KW - teaching design and practice

UR - https://www.scopus.com/pages/publications/85174515677

U2 - 10.1109/ICEED59801.2023.10264040

DO - 10.1109/ICEED59801.2023.10264040

M3 - 会议稿件

AN - SCOPUS:85174515677

T3 - 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023

SP - 139

EP - 142

BT - 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 12th IEEE International Conference on Engineering Education, ICEED 2023

Y2 - 29 August 2023 through 30 August 2023

ER -

Yang F, Gao Y, Li Y, Cai L, Liu J, Geng Y et al. Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model. In 2023 IEEE 12th International Conference on Engineering Education, ICEED 2023. Institute of Electrical and Electronics Engineers Inc. 2023. p. 139-142. (2023 IEEE 12th International Conference on Engineering Education, ICEED 2023). doi: 10.1109/ICEED59801.2023.10264040

Teaching Design and Practice of Non-Traditional Machining Course Based on 5 Stars Instructional Model

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this