Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance

Yongjiang Huang; Yuanzhi Guo; Hongbo Fan; Jun Shen

doi:10.1016/j.matlet.2012.08.114

Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance

Yongjiang Huang
, Yuanzhi Guo
, Hongbo Fan
, Jun Shen^*

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

82 Scopus citations

Abstract

Fe-based metallic glasses usually possess ultrahigh hardness, elastic modulus/limit and wear/corrosion resistance. In the present investigation, atmospheric plasma spray was used to deposit Fe-based metallic coatings onto 921A navy steel and Ti-6Al-4V alloy substrates. The microstructure and corrosion properties of the Fe-based metallic coatings were studied. It was found that the obtained Fe-based coating with about 300 μm in thickness showed fully amorphous state and possessed low porosity. Moreover, the Fe-based coating exhibited better corrosion resistance than 921A navy steel and Ti-6Al-4V alloy in aggressive H₂SO₄ solutions. This amorphous metallic coating could be applied as an excellent alternative material in corrosion environments.

Original language	English
Pages (from-to)	229-232
Number of pages	4
Journal	Materials Letters
Volume	89
DOIs	https://doi.org/10.1016/j.matlet.2012.08.114
State	Published - 15 Dec 2012
Externally published	Yes

Keywords

Amorphous materials
Corrosion
Powder technology

Access to Document

10.1016/j.matlet.2012.08.114

Cite this

@article{b13c7bd4e73c4136a1354539925ecf22,

title = "Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance",

abstract = "Fe-based metallic glasses usually possess ultrahigh hardness, elastic modulus/limit and wear/corrosion resistance. In the present investigation, atmospheric plasma spray was used to deposit Fe-based metallic coatings onto 921A navy steel and Ti-6Al-4V alloy substrates. The microstructure and corrosion properties of the Fe-based metallic coatings were studied. It was found that the obtained Fe-based coating with about 300 μm in thickness showed fully amorphous state and possessed low porosity. Moreover, the Fe-based coating exhibited better corrosion resistance than 921A navy steel and Ti-6Al-4V alloy in aggressive H2SO4 solutions. This amorphous metallic coating could be applied as an excellent alternative material in corrosion environments.",

keywords = "Amorphous materials, Corrosion, Powder technology",

author = "Yongjiang Huang and Yuanzhi Guo and Hongbo Fan and Jun Shen",

year = "2012",

month = dec,

day = "15",

doi = "10.1016/j.matlet.2012.08.114",

language = "英语",

volume = "89",

pages = "229--232",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance

AU - Huang, Yongjiang

AU - Guo, Yuanzhi

AU - Fan, Hongbo

AU - Shen, Jun

PY - 2012/12/15

Y1 - 2012/12/15

N2 - Fe-based metallic glasses usually possess ultrahigh hardness, elastic modulus/limit and wear/corrosion resistance. In the present investigation, atmospheric plasma spray was used to deposit Fe-based metallic coatings onto 921A navy steel and Ti-6Al-4V alloy substrates. The microstructure and corrosion properties of the Fe-based metallic coatings were studied. It was found that the obtained Fe-based coating with about 300 μm in thickness showed fully amorphous state and possessed low porosity. Moreover, the Fe-based coating exhibited better corrosion resistance than 921A navy steel and Ti-6Al-4V alloy in aggressive H2SO4 solutions. This amorphous metallic coating could be applied as an excellent alternative material in corrosion environments.

AB - Fe-based metallic glasses usually possess ultrahigh hardness, elastic modulus/limit and wear/corrosion resistance. In the present investigation, atmospheric plasma spray was used to deposit Fe-based metallic coatings onto 921A navy steel and Ti-6Al-4V alloy substrates. The microstructure and corrosion properties of the Fe-based metallic coatings were studied. It was found that the obtained Fe-based coating with about 300 μm in thickness showed fully amorphous state and possessed low porosity. Moreover, the Fe-based coating exhibited better corrosion resistance than 921A navy steel and Ti-6Al-4V alloy in aggressive H2SO4 solutions. This amorphous metallic coating could be applied as an excellent alternative material in corrosion environments.

KW - Amorphous materials

KW - Corrosion

KW - Powder technology

UR - https://www.scopus.com/pages/publications/84867514119

U2 - 10.1016/j.matlet.2012.08.114

DO - 10.1016/j.matlet.2012.08.114

M3 - 文章

AN - SCOPUS:84867514119

SN - 0167-577X

VL - 89

SP - 229

EP - 232

JO - Materials Letters

JF - Materials Letters

ER -

Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this