Skip to main navigation Skip to search Skip to main content

Syngas production by simultaneous splitting of H2O and CO2 via iron oxide (Fe3O4) redox reactions under high-pressure

  • School of Energy Science and Engineering, Harbin Institute of Technology

Research output: Contribution to journalArticlepeer-review

Abstract

In this paper, OpenFOAM was employed to numerically investigate syngas (H2 and CO) production by the simultaneous splitting of H2O and CO2 via thermochemical redox cycle based on iron oxide (Fe3O4). The effects of operating conditions such as pressure, temperature and species reactant ratios on syngas yield were investigated. The results indicated that amount of syngas yield was highly dependent on the reduction temperature. It was found that the process at high pressure could lower the reaction temperature and increased species production rate. The overall syngas yield increased from 1.34% up to 98.65% when the pressure increased from 5 to 20 atm. The analysis of the results showed that the syngas yield and the syngas composition were strongly influenced by the ratio of H2O/CO2g). The highest syngas purity (ratio of H2/CO (γs)) = 3.36 was reached at γg = 2. The optimum operating conditions for hydrogen-rich syngas production were obtained when γg = 2 under 1600 K at 20 atm.

Original languageEnglish
Pages (from-to)19936-19946
Number of pages11
JournalInternational Journal of Hydrogen Energy
Volume41
Issue number44
DOIs
StatePublished - 26 Nov 2016
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Iron oxide
  • OpenFOAM
  • Redox reaction
  • Syngas yield
  • Thermochemical cycle

Fingerprint

Dive into the research topics of 'Syngas production by simultaneous splitting of H2O and CO2 via iron oxide (Fe3O4) redox reactions under high-pressure'. Together they form a unique fingerprint.

Cite this