Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations

Yidong Du; Yiyang Chen; Lei Yu; Lining Sun; Zekai Lyu; Lijian Wu

doi:10.1109/CIEEC58067.2023.10167252

Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations

Yidong Du
, Yiyang Chen
, Lei Yu
, Lining Sun
, Zekai Lyu
, Lijian Wu

Soochow University
Zhejiang University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

For dual three-phase surface-mounted PM (DTPSPM) machines, three-phase short circuit (3PSC) is usually assumed to happen in only one winding group whilst the remaining one is normally supplied. In this paper, by fully utilizing healthy winding group (HWG), two suppression methods against 3PSC current are proposed for DTPSPM machines with different winding configurations. The first method is regulating HWG current amplitude and angle. For DTPSPM machines with symmetrical winding configuration, it is found that the d- and q-axis peak 3PSC current can be reduced to its minimum value when HWG current angles are about 90 and 135 electrical degrees, respectively. In addition, the suppression effect can be further improved when HWG current amplitude increases. For DTPSPM machines with asymmetric winding configuration, the suppression effect of regulating HWG current heavily depends on 3PSC start rotor position. The second method is forcing HWG into 3PSC. This method leads to an additional inductance component in faulty winding group, which thus reduces 3PSC peak current. Finally, the theoretical analysis is validated by FE simulation.

Original language	English
Title of host publication	2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	4195-4200
Number of pages	6
ISBN (Electronic)	9798350346671
DOIs	https://doi.org/10.1109/CIEEC58067.2023.10167252
State	Published - 2023
Externally published	Yes
Event	6th IEEE International Electrical and Energy Conference, CIEEC 2023 - Hefei, China Duration: 12 May 2023 → 14 May 2023

Publication series

Name	2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023

Conference

Conference	6th IEEE International Electrical and Energy Conference, CIEEC 2023
Country/Territory	China
City	Hefei
Period	12/05/23 → 14/05/23

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Dual three-phase
PM machine
symmetric winding configuration
three-phase short circuit

Access to Document

10.1109/CIEEC58067.2023.10167252

Cite this

Du, Y., Chen, Y., Yu, L., Sun, L., Lyu, Z., & Wu, L. (2023). Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations. In 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023 (pp. 4195-4200). (2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CIEEC58067.2023.10167252

Du, Yidong ; Chen, Yiyang ; Yu, Lei et al. / Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations. 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023. Institute of Electrical and Electronics Engineers Inc., 2023. pp. 4195-4200 (2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023).

@inproceedings{a801a57b4fd74042ab1b4aacd6c76c81,

title = "Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations",

abstract = "For dual three-phase surface-mounted PM (DTPSPM) machines, three-phase short circuit (3PSC) is usually assumed to happen in only one winding group whilst the remaining one is normally supplied. In this paper, by fully utilizing healthy winding group (HWG), two suppression methods against 3PSC current are proposed for DTPSPM machines with different winding configurations. The first method is regulating HWG current amplitude and angle. For DTPSPM machines with symmetrical winding configuration, it is found that the d- and q-axis peak 3PSC current can be reduced to its minimum value when HWG current angles are about 90 and 135 electrical degrees, respectively. In addition, the suppression effect can be further improved when HWG current amplitude increases. For DTPSPM machines with asymmetric winding configuration, the suppression effect of regulating HWG current heavily depends on 3PSC start rotor position. The second method is forcing HWG into 3PSC. This method leads to an additional inductance component in faulty winding group, which thus reduces 3PSC peak current. Finally, the theoretical analysis is validated by FE simulation.",

keywords = "Dual three-phase, PM machine, symmetric winding configuration, three-phase short circuit",

author = "Yidong Du and Yiyang Chen and Lei Yu and Lining Sun and Zekai Lyu and Lijian Wu",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 6th IEEE International Electrical and Energy Conference, CIEEC 2023 ; Conference date: 12-05-2023 Through 14-05-2023",

year = "2023",

doi = "10.1109/CIEEC58067.2023.10167252",

language = "英语",

series = "2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "4195--4200",

booktitle = "2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023",

address = "美国",

}

Du, Y, Chen, Y, Yu, L, Sun, L, Lyu, Z & Wu, L 2023, Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations. in 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023. 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023, Institute of Electrical and Electronics Engineers Inc., pp. 4195-4200, 6th IEEE International Electrical and Energy Conference, CIEEC 2023, Hefei, China, 12/05/23. https://doi.org/10.1109/CIEEC58067.2023.10167252

Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations. / Du, Yidong; Chen, Yiyang; Yu, Lei et al.
2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023. Institute of Electrical and Electronics Engineers Inc., 2023. p. 4195-4200 (2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations

AU - Du, Yidong

AU - Chen, Yiyang

AU - Yu, Lei

AU - Sun, Lining

AU - Lyu, Zekai

AU - Wu, Lijian

PY - 2023

Y1 - 2023

N2 - For dual three-phase surface-mounted PM (DTPSPM) machines, three-phase short circuit (3PSC) is usually assumed to happen in only one winding group whilst the remaining one is normally supplied. In this paper, by fully utilizing healthy winding group (HWG), two suppression methods against 3PSC current are proposed for DTPSPM machines with different winding configurations. The first method is regulating HWG current amplitude and angle. For DTPSPM machines with symmetrical winding configuration, it is found that the d- and q-axis peak 3PSC current can be reduced to its minimum value when HWG current angles are about 90 and 135 electrical degrees, respectively. In addition, the suppression effect can be further improved when HWG current amplitude increases. For DTPSPM machines with asymmetric winding configuration, the suppression effect of regulating HWG current heavily depends on 3PSC start rotor position. The second method is forcing HWG into 3PSC. This method leads to an additional inductance component in faulty winding group, which thus reduces 3PSC peak current. Finally, the theoretical analysis is validated by FE simulation.

AB - For dual three-phase surface-mounted PM (DTPSPM) machines, three-phase short circuit (3PSC) is usually assumed to happen in only one winding group whilst the remaining one is normally supplied. In this paper, by fully utilizing healthy winding group (HWG), two suppression methods against 3PSC current are proposed for DTPSPM machines with different winding configurations. The first method is regulating HWG current amplitude and angle. For DTPSPM machines with symmetrical winding configuration, it is found that the d- and q-axis peak 3PSC current can be reduced to its minimum value when HWG current angles are about 90 and 135 electrical degrees, respectively. In addition, the suppression effect can be further improved when HWG current amplitude increases. For DTPSPM machines with asymmetric winding configuration, the suppression effect of regulating HWG current heavily depends on 3PSC start rotor position. The second method is forcing HWG into 3PSC. This method leads to an additional inductance component in faulty winding group, which thus reduces 3PSC peak current. Finally, the theoretical analysis is validated by FE simulation.

KW - Dual three-phase

KW - PM machine

KW - symmetric winding configuration

KW - three-phase short circuit

UR - https://www.scopus.com/pages/publications/85167567397

U2 - 10.1109/CIEEC58067.2023.10167252

DO - 10.1109/CIEEC58067.2023.10167252

M3 - 会议稿件

AN - SCOPUS:85167567397

T3 - 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023

SP - 4195

EP - 4200

BT - 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 6th IEEE International Electrical and Energy Conference, CIEEC 2023

Y2 - 12 May 2023 through 14 May 2023

ER -

Du Y, Chen Y, Yu L, Sun L, Lyu Z, Wu L. Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations. In 2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023. Institute of Electrical and Electronics Engineers Inc. 2023. p. 4195-4200. (2023 IEEE 6th International Electrical and Energy Conference, CIEEC 2023). doi: 10.1109/CIEEC58067.2023.10167252

Suppression of Three-Phase Short Circuit Current in Dual Three-Phase Surface-Mounted PM Machines with Different Winding Configurations

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this