Study on the transmissible torque of HSK-E50 toolholder-spindle interface

Yong Lu; Chongqiang Huang; Jian Wang

doi:10.4028/www.scientific.net/AMM.37-38.1351

Study on the transmissible torque of HSK-E50 toolholder-spindle interface

Yong Lu^*
, Chongqiang Huang
, Jian Wang

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper introduces a methodology to evaluate and calculate the transmissible torque of the HSK-E tool system based on FEM. Calculation method of the transmissible torque and building of the FEM analysis model was first introduced. Using the model to analyze the effect of the interference, spindle speed, and drawbar force on the stress distributions of the contact surfaces of toolholder-spindle interface, then the transmissible torque is finally calculated. The results show that the HSK-E tool system satisfies high speed cutting requirements provided that reasonable parameters of the interference and the drawbar force are designed.

Original language	English
Title of host publication	Advances in Engineering Design and Optimization
Pages	1351-1355
Number of pages	5
DOIs	https://doi.org/10.4028/www.scientific.net/AMM.37-38.1351
State	Published - 2010
Event	International Conference on Engineering Design and Optimization, ICEDO 2010 - Ningbo, China Duration: 28 Oct 2010 → 30 Oct 2010

Publication series

Name	Applied Mechanics and Materials
Volume	37-38
ISSN (Print)	1660-9336
ISSN (Electronic)	1662-7482

Conference

Conference	International Conference on Engineering Design and Optimization, ICEDO 2010
Country/Territory	China
City	Ningbo
Period	28/10/10 → 30/10/10

Keywords

Finite element method
Toolholder-spindle interface
Transmissible torque

Access to Document

10.4028/www.scientific.net/AMM.37-38.1351

Cite this

@inproceedings{ffe121e2325d4ec484e5e7409ead5f8a,

title = "Study on the transmissible torque of HSK-E50 toolholder-spindle interface",

abstract = "This paper introduces a methodology to evaluate and calculate the transmissible torque of the HSK-E tool system based on FEM. Calculation method of the transmissible torque and building of the FEM analysis model was first introduced. Using the model to analyze the effect of the interference, spindle speed, and drawbar force on the stress distributions of the contact surfaces of toolholder-spindle interface, then the transmissible torque is finally calculated. The results show that the HSK-E tool system satisfies high speed cutting requirements provided that reasonable parameters of the interference and the drawbar force are designed.",

keywords = "Finite element method, Toolholder-spindle interface, Transmissible torque",

author = "Yong Lu and Chongqiang Huang and Jian Wang",

year = "2010",

doi = "10.4028/www.scientific.net/AMM.37-38.1351",

language = "英语",

isbn = "9780878492220",

series = "Applied Mechanics and Materials",

pages = "1351--1355",

booktitle = "Advances in Engineering Design and Optimization",

note = "International Conference on Engineering Design and Optimization, ICEDO 2010 ; Conference date: 28-10-2010 Through 30-10-2010",

}

Lu, Y, Huang, C & Wang, J 2010, Study on the transmissible torque of HSK-E50 toolholder-spindle interface. in Advances in Engineering Design and Optimization. Applied Mechanics and Materials, vol. 37-38, pp. 1351-1355, International Conference on Engineering Design and Optimization, ICEDO 2010, Ningbo, China, 28/10/10. https://doi.org/10.4028/www.scientific.net/AMM.37-38.1351

TY - GEN

T1 - Study on the transmissible torque of HSK-E50 toolholder-spindle interface

AU - Lu, Yong

AU - Huang, Chongqiang

AU - Wang, Jian

PY - 2010

Y1 - 2010

N2 - This paper introduces a methodology to evaluate and calculate the transmissible torque of the HSK-E tool system based on FEM. Calculation method of the transmissible torque and building of the FEM analysis model was first introduced. Using the model to analyze the effect of the interference, spindle speed, and drawbar force on the stress distributions of the contact surfaces of toolholder-spindle interface, then the transmissible torque is finally calculated. The results show that the HSK-E tool system satisfies high speed cutting requirements provided that reasonable parameters of the interference and the drawbar force are designed.

AB - This paper introduces a methodology to evaluate and calculate the transmissible torque of the HSK-E tool system based on FEM. Calculation method of the transmissible torque and building of the FEM analysis model was first introduced. Using the model to analyze the effect of the interference, spindle speed, and drawbar force on the stress distributions of the contact surfaces of toolholder-spindle interface, then the transmissible torque is finally calculated. The results show that the HSK-E tool system satisfies high speed cutting requirements provided that reasonable parameters of the interference and the drawbar force are designed.

KW - Finite element method

KW - Toolholder-spindle interface

KW - Transmissible torque

UR - https://www.scopus.com/pages/publications/78650919779

U2 - 10.4028/www.scientific.net/AMM.37-38.1351

DO - 10.4028/www.scientific.net/AMM.37-38.1351

M3 - 会议稿件

AN - SCOPUS:78650919779

SN - 9780878492220

T3 - Applied Mechanics and Materials

SP - 1351

EP - 1355

BT - Advances in Engineering Design and Optimization

T2 - International Conference on Engineering Design and Optimization, ICEDO 2010

Y2 - 28 October 2010 through 30 October 2010

ER -

Study on the transmissible torque of HSK-E50 toolholder-spindle interface

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this