@inproceedings{530121db2c5640cf8dff2ea64bfd5549,
title = "Study on scanner for large-diameter tubular joint welds based on ultrasonic phased array",
abstract = "For the complexity of weld, the automatic inspecting for the tubular joints which are in working is difficult. Therefore the scanner which has three degrees of freedom for inspecting of large-diameter tubular joints was studied and manufactured based on the scanning principle of ultrasonic phased array. The following of probe to weld is realized by the simultaneous motion of two degrees of freedom and the pose between probe and weld is adjusted by the other degree of freedom. The control strategy of the scanner was provided. Experiments were made with scanner on reference blocks, the results indicate that the automatic ultrasonic phased array inspection is more excellent than the conventional ultrasonic inspection in reliability and repetition.",
keywords = "Control strategy, Large-diameter tubular joint, Scanner, Ultrasonic phased array probe",
author = "Zongquan Deng and Guangping Hao and Dewei Tang and Baohua Shan",
year = "2006",
doi = "10.4028/0-87849-421-9.265",
language = "英语",
isbn = "0878494219",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "265--268",
editor = "Chengyu Jiang and Geng Liu and Dinghua Zhang and Xipeng Xu",
booktitle = "Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China",
address = "瑞士",
note = "12th International Manufacturing Conference in China, IMCC2006 ; Conference date: 21-09-2006 Through 23-09-2006",
}