Study on casting process of array holes

M. L. Jin; Y. D. Qu; G. Qing; R. R. Chen; G. L. Li; J. H. You; R. D. Li

doi:10.1007/s00170-016-8457-z

Study on casting process of array holes

M. L. Jin
, Y. D. Qu^*
, G. Qing
, R. R. Chen
, G. L. Li
, J. H. You
, R. D. Li

^*Corresponding author for this work

Shenyang University of Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen.

Original language	English
Pages (from-to)	3173-3177
Number of pages	5
Journal	International Journal of Advanced Manufacturing Technology
Volume	86
Issue number	9-12
DOIs	https://doi.org/10.1007/s00170-016-8457-z
State	Published - 1 Oct 2016
Externally published	Yes

Keywords

Array holes
Casting
Filling

Access to Document

10.1007/s00170-016-8457-z

Cite this

@article{380db8433b924571a0217858ab608b12,

title = "Study on casting process of array holes",

abstract = "Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen.",

keywords = "Array holes, Casting, Filling",

author = "Jin, \{M. L.\} and Qu, \{Y. D.\} and G. Qing and Chen, \{R. R.\} and Li, \{G. L.\} and You, \{J. H.\} and Li, \{R. D.\}",

note = "Publisher Copyright: {\textcopyright} 2016, Springer-Verlag London.",

year = "2016",

month = oct,

day = "1",

doi = "10.1007/s00170-016-8457-z",

language = "英语",

volume = "86",

pages = "3173--3177",

journal = "International Journal of Advanced Manufacturing Technology",

issn = "0268-3768",

publisher = "Springer London",

number = "9-12",

}

TY - JOUR

T1 - Study on casting process of array holes

AU - Jin, M. L.

AU - Qu, Y. D.

AU - Qing, G.

AU - Chen, R. R.

AU - Li, G. L.

AU - You, J. H.

AU - Li, R. D.

PY - 2016/10/1

Y1 - 2016/10/1

N2 - Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen.

AB - Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen.

KW - Array holes

KW - Casting

KW - Filling

UR - https://www.scopus.com/pages/publications/84957692456

U2 - 10.1007/s00170-016-8457-z

DO - 10.1007/s00170-016-8457-z

M3 - 文章

AN - SCOPUS:84957692456

SN - 0268-3768

VL - 86

SP - 3173

EP - 3177

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

IS - 9-12

ER -

Study on casting process of array holes

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this