Structure, bioactivity and MC3T3-E1 cell response of sodium hydrogen titanium oxide nanowire on titanium

Shao Dong Jing; Su Cheng; Rui Zhou; Da Qing Wei; Yu Zhou

doi:10.11862/CJIC.2015.119

Structure, bioactivity and MC3T3-E1 cell response of sodium hydrogen titanium oxide nanowire on titanium

Shao Dong Jing
, Su Cheng^*
, Rui Zhou
, Da Qing Wei
, Yu Zhou

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin University of Science and Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

Abstract

The bioactive nanowire of sodium hydrogen titanium oxide (Na_0.8H_1.2Ti₃O₇) was obtained by Chemical treating the surface of TiO₂-based coating containing Si and Ca (SC) prepared by microarc oxidation (MAO). During the chemical treatment, the dissolution of Ca and Si, and the deposition of Na appear on the surface of the SC coating. The chemically treated SC coating shows better hydrophilic and apatite-formation ability than those of the SC coating, which could be associated with the special structure such as OH group in the sodium hydrogen titanium oxide (SHTO) as well as the Ti-OH group formation during the simulated body fluid immersion. At the same time’ the SHTO nanowire is more suitable for the MC3T3-E1 cell adhesion and proliferation due to surface morphology, phase composition, OH group structure and better wetting ability.

Original language	English
Pages (from-to)	812-824
Number of pages	13
Journal	Chinese Journal of Inorganic Chemistry
Volume	31
Issue number	4
DOIs	https://doi.org/10.11862/CJIC.2015.119
State	Published - 1 Jan 2015

Keywords

Chemical treatment
MC3T3-E1
Microarc oxidation
Nanowire
Titanium

Access to Document

10.11862/CJIC.2015.119

Cite this

@article{21f5e3175bc747109f64e1f050a406d6,

title = "Structure, bioactivity and MC3T3-E1 cell response of sodium hydrogen titanium oxide nanowire on titanium",

abstract = "The bioactive nanowire of sodium hydrogen titanium oxide (Na0.8H1.2Ti3O7) was obtained by Chemical treating the surface of TiO2-based coating containing Si and Ca (SC) prepared by microarc oxidation (MAO). During the chemical treatment, the dissolution of Ca and Si, and the deposition of Na appear on the surface of the SC coating. The chemically treated SC coating shows better hydrophilic and apatite-formation ability than those of the SC coating, which could be associated with the special structure such as OH group in the sodium hydrogen titanium oxide (SHTO) as well as the Ti-OH group formation during the simulated body fluid immersion. At the same time{\textquoteright} the SHTO nanowire is more suitable for the MC3T3-E1 cell adhesion and proliferation due to surface morphology, phase composition, OH group structure and better wetting ability.",

keywords = "Chemical treatment, MC3T3-E1, Microarc oxidation, Nanowire, Titanium",

author = "Jing, \{Shao Dong\} and Su Cheng and Rui Zhou and Wei, \{Da Qing\} and Yu Zhou",

year = "2015",

month = jan,

day = "1",

doi = "10.11862/CJIC.2015.119",

language = "英语",

volume = "31",

pages = "812--824",

journal = "Chinese Journal of Inorganic Chemistry",

issn = "1001-4861",

publisher = "Chinese Chemical Society",

number = "4",

}

TY - JOUR

T1 - Structure, bioactivity and MC3T3-E1 cell response of sodium hydrogen titanium oxide nanowire on titanium

AU - Jing, Shao Dong

AU - Cheng, Su

AU - Zhou, Rui

AU - Wei, Da Qing

AU - Zhou, Yu

PY - 2015/1/1

Y1 - 2015/1/1

N2 - The bioactive nanowire of sodium hydrogen titanium oxide (Na0.8H1.2Ti3O7) was obtained by Chemical treating the surface of TiO2-based coating containing Si and Ca (SC) prepared by microarc oxidation (MAO). During the chemical treatment, the dissolution of Ca and Si, and the deposition of Na appear on the surface of the SC coating. The chemically treated SC coating shows better hydrophilic and apatite-formation ability than those of the SC coating, which could be associated with the special structure such as OH group in the sodium hydrogen titanium oxide (SHTO) as well as the Ti-OH group formation during the simulated body fluid immersion. At the same time’ the SHTO nanowire is more suitable for the MC3T3-E1 cell adhesion and proliferation due to surface morphology, phase composition, OH group structure and better wetting ability.

AB - The bioactive nanowire of sodium hydrogen titanium oxide (Na0.8H1.2Ti3O7) was obtained by Chemical treating the surface of TiO2-based coating containing Si and Ca (SC) prepared by microarc oxidation (MAO). During the chemical treatment, the dissolution of Ca and Si, and the deposition of Na appear on the surface of the SC coating. The chemically treated SC coating shows better hydrophilic and apatite-formation ability than those of the SC coating, which could be associated with the special structure such as OH group in the sodium hydrogen titanium oxide (SHTO) as well as the Ti-OH group formation during the simulated body fluid immersion. At the same time’ the SHTO nanowire is more suitable for the MC3T3-E1 cell adhesion and proliferation due to surface morphology, phase composition, OH group structure and better wetting ability.

KW - Chemical treatment

KW - MC3T3-E1

KW - Microarc oxidation

KW - Nanowire

KW - Titanium

UR - https://www.scopus.com/pages/publications/84948767411

U2 - 10.11862/CJIC.2015.119

DO - 10.11862/CJIC.2015.119

M3 - 文章

AN - SCOPUS:84948767411

SN - 1001-4861

VL - 31

SP - 812

EP - 824

JO - Chinese Journal of Inorganic Chemistry

JF - Chinese Journal of Inorganic Chemistry

IS - 4

ER -

Structure, bioactivity and MC3T3-E1 cell response of sodium hydrogen titanium oxide nanowire on titanium

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this