Sizing equations suitable for driving motor initial design

Shihua Wu; Weiwei Fan; Shumei Cui

doi:10.1109/ITEC-AP.2014.6941045

Sizing equations suitable for driving motor initial design

School of Electrical Engineering and Automation

Harbin Institute of Technology Weihai

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

Sizing equations are important for driving motor design. Most current sizing equations were established based on the stator inner diameter. But for driving motors used in electric vehicle, ship or other transportation system, they often operate under more complex conditions and to decide the dimension parameters by stator outer diameter is more practical. So in this paper, new sizing equations were set up based on the derivation of motor's design equations. The power of motor could be calculated directly by stator outer diameter. Test results show that the equations' accuracy was sufficient for driving motor initial design.

Original language	English
Title of host publication	IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781479942398
DOIs	https://doi.org/10.1109/ITEC-AP.2014.6941045
State	Published - 30 Oct 2014
Event	2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Beijing, China Duration: 31 Aug 2014 → 3 Sep 2014

Publication series

Name	IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

Conference

Conference	2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014
Country/Territory	China
City	Beijing
Period	31/08/14 → 3/09/14

Access to Document

10.1109/ITEC-AP.2014.6941045

Cite this

Wu, S., Fan, W., & Cui, S. (2014). Sizing equations suitable for driving motor initial design. In IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings Article 6941045 (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ITEC-AP.2014.6941045

Wu, Shihua ; Fan, Weiwei ; Cui, Shumei. / Sizing equations suitable for driving motor initial design. IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings).

@inproceedings{c27c0139800b43f9b819c7ef70fd04b5,

title = "Sizing equations suitable for driving motor initial design",

abstract = "Sizing equations are important for driving motor design. Most current sizing equations were established based on the stator inner diameter. But for driving motors used in electric vehicle, ship or other transportation system, they often operate under more complex conditions and to decide the dimension parameters by stator outer diameter is more practical. So in this paper, new sizing equations were set up based on the derivation of motor's design equations. The power of motor could be calculated directly by stator outer diameter. Test results show that the equations' accuracy was sufficient for driving motor initial design.",

author = "Shihua Wu and Weiwei Fan and Shumei Cui",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 ; Conference date: 31-08-2014 Through 03-09-2014",

year = "2014",

month = oct,

day = "30",

doi = "10.1109/ITEC-AP.2014.6941045",

language = "英语",

series = "IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings",

address = "美国",

}

Wu, S , Fan, W & Cui, S 2014, Sizing equations suitable for driving motor initial design. in IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings., 6941045, IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings, Institute of Electrical and Electronics Engineers Inc., 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014, Beijing, China, 31/08/14. https://doi.org/10.1109/ITEC-AP.2014.6941045

Sizing equations suitable for driving motor initial design. / Wu, Shihua ; Fan, Weiwei ; Cui, Shumei.
IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. 6941045 (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Sizing equations suitable for driving motor initial design

AU - Wu, Shihua

AU - Fan, Weiwei

AU - Cui, Shumei

PY - 2014/10/30

Y1 - 2014/10/30

N2 - Sizing equations are important for driving motor design. Most current sizing equations were established based on the stator inner diameter. But for driving motors used in electric vehicle, ship or other transportation system, they often operate under more complex conditions and to decide the dimension parameters by stator outer diameter is more practical. So in this paper, new sizing equations were set up based on the derivation of motor's design equations. The power of motor could be calculated directly by stator outer diameter. Test results show that the equations' accuracy was sufficient for driving motor initial design.

AB - Sizing equations are important for driving motor design. Most current sizing equations were established based on the stator inner diameter. But for driving motors used in electric vehicle, ship or other transportation system, they often operate under more complex conditions and to decide the dimension parameters by stator outer diameter is more practical. So in this paper, new sizing equations were set up based on the derivation of motor's design equations. The power of motor could be calculated directly by stator outer diameter. Test results show that the equations' accuracy was sufficient for driving motor initial design.

UR - https://www.scopus.com/pages/publications/84916228517

U2 - 10.1109/ITEC-AP.2014.6941045

DO - 10.1109/ITEC-AP.2014.6941045

M3 - 会议稿件

AN - SCOPUS:84916228517

T3 - IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

BT - IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014

Y2 - 31 August 2014 through 3 September 2014

ER -

Wu S , Fan W , Cui S. Sizing equations suitable for driving motor initial design. In IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc. 2014. 6941045. (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings). doi: 10.1109/ITEC-AP.2014.6941045

Sizing equations suitable for driving motor initial design

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this