Rotary ultrasonic machining of SiCp/Al composites: An experimental study on cutting force and machinability

Ming Wang; Wei Zheng; Ming Zhou; Qun Zhang

doi:10.1177/1687814019898329

Rotary ultrasonic machining of SiCp/Al composites: An experimental study on cutting force and machinability

Ming Wang^*
, Wei Zheng
, Ming Zhou
, Qun Zhang

^*Corresponding author for this work

School of Mechatronics Engineering

Heilongjiang Bayi Agricultural University
Harbin Institute of Technology
Beijing Institute of Astronautical System Engineering

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

Abstract

To improve the processing quality and reduce the cost of SiCp/Al composites has become a key problem for its application. Rotary ultrasonic machining is highly suitable for machining of SiCp/Al composites with a medium or high volume fraction of reinforced phase, and the processing quality and efficiency could be improved greatly. In this article, the rotary ultrasonic machining experiments were performed for the SiCp/Al composites reinforced with 45% volume fraction, and the effects of processing parameters on the cutting force of face and flank machining were studied. The cutting force values reduce significantly, and the grinding force ratios F_n/F_t of face and flank machining are 2.843 and 1.336, respectively, which indicate that better machinability can be achieved for SiCp/Al composites using rotary ultrasonic machining.

Original language	English
Journal	Advances in Mechanical Engineering
Volume	11
Issue number	12
DOIs	https://doi.org/10.1177/1687814019898329
State	Published - Dec 2019

Keywords

SiCp/Al composites
cutting force
face machining
flank machining
machinability
rotary ultrasonic machining

Access to Document

10.1177/1687814019898329

Cite this

@article{94e0b246e5ca45538a545d17812e180f,

title = "Rotary ultrasonic machining of SiCp/Al composites: An experimental study on cutting force and machinability",

abstract = "To improve the processing quality and reduce the cost of SiCp/Al composites has become a key problem for its application. Rotary ultrasonic machining is highly suitable for machining of SiCp/Al composites with a medium or high volume fraction of reinforced phase, and the processing quality and efficiency could be improved greatly. In this article, the rotary ultrasonic machining experiments were performed for the SiCp/Al composites reinforced with 45\% volume fraction, and the effects of processing parameters on the cutting force of face and flank machining were studied. The cutting force values reduce significantly, and the grinding force ratios Fn/Ft of face and flank machining are 2.843 and 1.336, respectively, which indicate that better machinability can be achieved for SiCp/Al composites using rotary ultrasonic machining.",

keywords = "SiCp/Al composites, cutting force, face machining, flank machining, machinability, rotary ultrasonic machining",

author = "Ming Wang and Wei Zheng and Ming Zhou and Qun Zhang",

note = "Publisher Copyright: {\textcopyright} The Author(s) 2019.",

year = "2019",

month = dec,

doi = "10.1177/1687814019898329",

language = "英语",

volume = "11",

journal = "Advances in Mechanical Engineering",

issn = "1687-8132",

publisher = "SAGE Publications Inc.",

number = "12",

}

TY - JOUR

T1 - Rotary ultrasonic machining of SiCp/Al composites

T2 - An experimental study on cutting force and machinability

AU - Wang, Ming

AU - Zheng, Wei

AU - Zhou, Ming

AU - Zhang, Qun

N1 - Publisher Copyright: © The Author(s) 2019.

PY - 2019/12

Y1 - 2019/12

N2 - To improve the processing quality and reduce the cost of SiCp/Al composites has become a key problem for its application. Rotary ultrasonic machining is highly suitable for machining of SiCp/Al composites with a medium or high volume fraction of reinforced phase, and the processing quality and efficiency could be improved greatly. In this article, the rotary ultrasonic machining experiments were performed for the SiCp/Al composites reinforced with 45% volume fraction, and the effects of processing parameters on the cutting force of face and flank machining were studied. The cutting force values reduce significantly, and the grinding force ratios Fn/Ft of face and flank machining are 2.843 and 1.336, respectively, which indicate that better machinability can be achieved for SiCp/Al composites using rotary ultrasonic machining.

AB - To improve the processing quality and reduce the cost of SiCp/Al composites has become a key problem for its application. Rotary ultrasonic machining is highly suitable for machining of SiCp/Al composites with a medium or high volume fraction of reinforced phase, and the processing quality and efficiency could be improved greatly. In this article, the rotary ultrasonic machining experiments were performed for the SiCp/Al composites reinforced with 45% volume fraction, and the effects of processing parameters on the cutting force of face and flank machining were studied. The cutting force values reduce significantly, and the grinding force ratios Fn/Ft of face and flank machining are 2.843 and 1.336, respectively, which indicate that better machinability can be achieved for SiCp/Al composites using rotary ultrasonic machining.

KW - SiCp/Al composites

KW - cutting force

KW - face machining

KW - flank machining

KW - machinability

KW - rotary ultrasonic machining

UR - https://www.scopus.com/pages/publications/85077148253

U2 - 10.1177/1687814019898329

DO - 10.1177/1687814019898329

M3 - 文章

AN - SCOPUS:85077148253

SN - 1687-8132

VL - 11

JO - Advances in Mechanical Engineering

JF - Advances in Mechanical Engineering

IS - 12

ER -

Rotary ultrasonic machining of SiCp/Al composites: An experimental study on cutting force and machinability

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this