Resin transfer moulded silica fibre/phenolics composites fabricated via solution impregnation route

Silica fibre/phenolics composites produced by resin transfer moulding (RTM) solution impregnation technique are finding applications as aerospace structures. Typical phenolics contain solvent to facilitate injection and mould filling. It has been found that volatilisations of solvent and condensation polymerisation byproduct would cause void in cured composites, which is believed to affect the properties of the final product. In the present study, the role of solvent in the RTM impregnation process of silica fibre/phenolics composites was investigated. Experiments on wettability and flow were performed to evaluate the thermodynamical Interaction on microscopic level occurring in fibre and resin system. Void content and interfacial strength were also examined. For the first time it has shown that the RTM process of silica fibre/phenolics composites is highly solvent dependent. Phenolics form distribution gradient in RTM mould with respect to isomeric composition under the effect of solvent, which results, to a varying extent, in the inhomogeneity of void content and thus interlaminar shear strength of the resulting product. The present work gives an insight into the role of organic solvent in RTM processing and this will help in choosing the best possible solvent for the solution impregnation system.