@inproceedings{e88c6c8e3ecc48a2a64038ac6999bc33,
title = "Research on squeeze casting composite mold materials by plasma spraying",
abstract = "Composite mold samples used in squeeze casting was fabricated by plasma spraying with 5CrMnMo and 3YSZ, which was shown high bonding strength and good thermal shock resistance. The best parameters with transition coat were explored by mechanical analyses. As results, the transition layer structure made of 75 percent NiCoCrAlY powders showed bonding strength was higher to 34.35MPa and that thermal cycles were up to 46.8 times. The effect of the transition layer was analyzed by microstructures and the failure mechanism of the coating material with a transition layer was discussed. The conclusion was that the physical mismatch and thermodynamic mismatch between the matrix and ceramic layers were the main cause of the failure.",
keywords = "Composite materials, NiCoCrAlY, Plasma spraying, Thermal shock resistance, Zirconia",
author = "Sun, \{Yong Gen\} and Fei, \{Yan Han\} and Wang, \{Yan Chun\} and Song, \{Xu Jie\} and Du, \{Lan Jun\} and Chen, \{Li Li\} and Du, \{Zhi Ming\}",
note = "Publisher Copyright: {\textcopyright} 2021 Trans Tech Publications Ltd, Switzerland.; 4th International Conference on Composite Material, Polymer Science and Engineering, CMPSE 2020 ; Conference date: 06-12-2020 Through 07-12-2020",
year = "2021",
doi = "10.4028/www.scientific.net/KEM.888.29",
language = "英语",
isbn = "9783035718294",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "29--35",
editor = "Katsuyuki Kida",
booktitle = "Polymer Science and Engineering II",
address = "瑞士",
}