Research on laser micro machining polystyrene material

Chaojian Hou; Lijun Yang; Yang Wang; Zhixing Song

doi:10.4028/www.scientific.net/AMR.628.83

Research on laser micro machining polystyrene material

Chaojian Hou^*
, Lijun Yang
, Yang Wang
, Zhixing Song

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology
School of Mechatronics Engineering, Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

Owing to drilling capacity can reach micron grade, laser punching technology has been widely used in high-tech field. In this article, ultraviolet laser has been adopted to punch on polystyrene material, the ablation principle and heat transfer between ultraviolet laser and material are analyzed. Through the finite element simulation, microporous temperature field distribution can be obtained. At last, by experiments that use single factor method to get laser parameters on the effect of surface morphology and microporous depth/diameter ratio, the optimal laser parameters that satisfy requirements which are less slag and tapered micropore can be acquired.

Original language	English
Title of host publication	Manufacturing Engineering and Technology for Manufacturing Growth
Pages	83-89
Number of pages	7
DOIs	https://doi.org/10.4028/www.scientific.net/AMR.628.83
State	Published - 2013
Event	2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth, METMG 2012 - San Diego, CA, United States Duration: 1 Nov 2012 → 2 Nov 2012

Publication series

Name	Advanced Materials Research
Volume	628
ISSN (Print)	1022-6680

Conference

Conference	2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth, METMG 2012
Country/Territory	United States
City	San Diego, CA
Period	1/11/12 → 2/11/12

Keywords

Micro machining
Polystyrene material
Ultraviolet laser

Access to Document

10.4028/www.scientific.net/AMR.628.83

Cite this

@inproceedings{c9bd444464a44e99a4505c8e3ea48145,

title = "Research on laser micro machining polystyrene material",

abstract = "Owing to drilling capacity can reach micron grade, laser punching technology has been widely used in high-tech field. In this article, ultraviolet laser has been adopted to punch on polystyrene material, the ablation principle and heat transfer between ultraviolet laser and material are analyzed. Through the finite element simulation, microporous temperature field distribution can be obtained. At last, by experiments that use single factor method to get laser parameters on the effect of surface morphology and microporous depth/diameter ratio, the optimal laser parameters that satisfy requirements which are less slag and tapered micropore can be acquired.",

keywords = "Micro machining, Polystyrene material, Ultraviolet laser",

author = "Chaojian Hou and Lijun Yang and Yang Wang and Zhixing Song",

year = "2013",

doi = "10.4028/www.scientific.net/AMR.628.83",

language = "英语",

isbn = "9783037855706",

series = "Advanced Materials Research",

pages = "83--89",

booktitle = "Manufacturing Engineering and Technology for Manufacturing Growth",

note = "2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth, METMG 2012 ; Conference date: 01-11-2012 Through 02-11-2012",

}

Hou, C, Yang, L, Wang, Y & Song, Z 2013, Research on laser micro machining polystyrene material. in Manufacturing Engineering and Technology for Manufacturing Growth. Advanced Materials Research, vol. 628, pp. 83-89, 2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth, METMG 2012, San Diego, CA, United States, 1/11/12. https://doi.org/10.4028/www.scientific.net/AMR.628.83

TY - GEN

T1 - Research on laser micro machining polystyrene material

AU - Hou, Chaojian

AU - Yang, Lijun

AU - Wang, Yang

AU - Song, Zhixing

PY - 2013

Y1 - 2013

N2 - Owing to drilling capacity can reach micron grade, laser punching technology has been widely used in high-tech field. In this article, ultraviolet laser has been adopted to punch on polystyrene material, the ablation principle and heat transfer between ultraviolet laser and material are analyzed. Through the finite element simulation, microporous temperature field distribution can be obtained. At last, by experiments that use single factor method to get laser parameters on the effect of surface morphology and microporous depth/diameter ratio, the optimal laser parameters that satisfy requirements which are less slag and tapered micropore can be acquired.

AB - Owing to drilling capacity can reach micron grade, laser punching technology has been widely used in high-tech field. In this article, ultraviolet laser has been adopted to punch on polystyrene material, the ablation principle and heat transfer between ultraviolet laser and material are analyzed. Through the finite element simulation, microporous temperature field distribution can be obtained. At last, by experiments that use single factor method to get laser parameters on the effect of surface morphology and microporous depth/diameter ratio, the optimal laser parameters that satisfy requirements which are less slag and tapered micropore can be acquired.

KW - Micro machining

KW - Polystyrene material

KW - Ultraviolet laser

UR - https://www.scopus.com/pages/publications/84873025090

U2 - 10.4028/www.scientific.net/AMR.628.83

DO - 10.4028/www.scientific.net/AMR.628.83

M3 - 会议稿件

AN - SCOPUS:84873025090

SN - 9783037855706

T3 - Advanced Materials Research

SP - 83

EP - 89

BT - Manufacturing Engineering and Technology for Manufacturing Growth

T2 - 2012 International Conference on Manufacturing Engineering and Technology for Manufacturing Growth, METMG 2012

Y2 - 1 November 2012 through 2 November 2012

ER -

Research on laser micro machining polystyrene material

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this