Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic properties

Yongjian Li; Qingxin Yang; Jianguo Zhu; Zhiwei Lin; Youguang Guo; Jingfeng Sun

doi:10.1109/TASC.2009.2039559

Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic properties

Yongjian Li^*
, Qingxin Yang
, Jianguo Zhu
, Zhiwei Lin
, Youguang Guo
, Jingfeng Sun

^*Corresponding author for this work

Hebei University of Technology
University of Technology Sydney

Research output: Contribution to journal › Article › peer-review

20 Scopus citations

Abstract

In this paper, a method of studying the three-dimensional (3-D) reluctivity tensor by measuring 3-D vector magnetic properties of the soft magnetic composite (SMC) material is presented. The magnetic flux density B and magnetic field strength H loci under alternating and rotating magnetizations are measured by using an improved 3-D tester. The magnetic reluctivity tensor can be expressed by a second-order three-dimensional full rank matrix by means of the experimental results. Taking the off-diagonal elements into account can benefit to accurate numerical analysis of magnetic field in 3-D flux electrical machines.

Original language	English
Article number	5422807
Pages (from-to)	1932-1935
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	20
Issue number	3
DOIs	https://doi.org/10.1109/TASC.2009.2039559
State	Published - Jun 2010
Externally published	Yes

Keywords

Anisotropy
Improved 3-D tester
Magnetic reluctivity tensor
Soft magnetic composite (SMC)

Access to Document

10.1109/TASC.2009.2039559

Cite this

@article{2c3013cb1d2b4bc1be388e6e934e6418,

title = "Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic properties",

abstract = "In this paper, a method of studying the three-dimensional (3-D) reluctivity tensor by measuring 3-D vector magnetic properties of the soft magnetic composite (SMC) material is presented. The magnetic flux density B and magnetic field strength H loci under alternating and rotating magnetizations are measured by using an improved 3-D tester. The magnetic reluctivity tensor can be expressed by a second-order three-dimensional full rank matrix by means of the experimental results. Taking the off-diagonal elements into account can benefit to accurate numerical analysis of magnetic field in 3-D flux electrical machines.",

keywords = "Anisotropy, Improved 3-D tester, Magnetic reluctivity tensor, Soft magnetic composite (SMC)",

author = "Yongjian Li and Qingxin Yang and Jianguo Zhu and Zhiwei Lin and Youguang Guo and Jingfeng Sun",

year = "2010",

month = jun,

doi = "10.1109/TASC.2009.2039559",

language = "英语",

volume = "20",

pages = "1932--1935",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

TY - JOUR

T1 - Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic properties

AU - Li, Yongjian

AU - Yang, Qingxin

AU - Zhu, Jianguo

AU - Lin, Zhiwei

AU - Guo, Youguang

AU - Sun, Jingfeng

PY - 2010/6

Y1 - 2010/6

N2 - In this paper, a method of studying the three-dimensional (3-D) reluctivity tensor by measuring 3-D vector magnetic properties of the soft magnetic composite (SMC) material is presented. The magnetic flux density B and magnetic field strength H loci under alternating and rotating magnetizations are measured by using an improved 3-D tester. The magnetic reluctivity tensor can be expressed by a second-order three-dimensional full rank matrix by means of the experimental results. Taking the off-diagonal elements into account can benefit to accurate numerical analysis of magnetic field in 3-D flux electrical machines.

AB - In this paper, a method of studying the three-dimensional (3-D) reluctivity tensor by measuring 3-D vector magnetic properties of the soft magnetic composite (SMC) material is presented. The magnetic flux density B and magnetic field strength H loci under alternating and rotating magnetizations are measured by using an improved 3-D tester. The magnetic reluctivity tensor can be expressed by a second-order three-dimensional full rank matrix by means of the experimental results. Taking the off-diagonal elements into account can benefit to accurate numerical analysis of magnetic field in 3-D flux electrical machines.

KW - Anisotropy

KW - Improved 3-D tester

KW - Magnetic reluctivity tensor

KW - Soft magnetic composite (SMC)

UR - https://www.scopus.com/pages/publications/77952956162

U2 - 10.1109/TASC.2009.2039559

DO - 10.1109/TASC.2009.2039559

M3 - 文章

AN - SCOPUS:77952956162

SN - 1051-8223

VL - 20

SP - 1932

EP - 1935

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 3

M1 - 5422807

ER -

Research of three-dimensional magnetic reluctivity tensor based on measurement of magnetic properties

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this