Regularity of surface roughness with polishing time in electrolysis and plasma polishing

Ji Wang; Laichun Suo; Lili Guan; Yili Fu

doi:10.3969/j.issn.1006-7043.201203060

Regularity of surface roughness with polishing time in electrolysis and plasma polishing

Ji Wang^*
, Laichun Suo
, Lili Guan
, Yili Fu

^*Corresponding author for this work

School of Mechatronics Engineering, Harbin Institute of Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

Surface roughness is the most important standard to measure the polishing effect. The mathematic model of surface roughness with polishing time in electrolysis and plasma polishing is established on the basis of the polishing mechanism in this paper. The roughness of the specimen with different polishing time was measured. Nonlinear fitting of the experimental data and the mathematic model is carried out, by which the mathematic model is improved. It is reasonable and feasible to use the improved mathematic model to fit the data and the adjusted coefficient of determination is 0.97139. Two other groups of experiments were done to verify the improved mathematic model is mainly in accordance with the actual polishing case.

Original language	English
Pages (from-to)	227-232
Number of pages	6
Journal	Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University
Volume	34
Issue number	2
DOIs	https://doi.org/10.3969/j.issn.1006-7043.201203060
State	Published - Feb 2013
Externally published	Yes

Keywords

Electrolyte
Mathematic model
Plasma polishing
Polishing time
Surface roughness

Access to Document

10.3969/j.issn.1006-7043.201203060

Cite this

@article{a185003ec726460ba7ab773f3aea0fab,

title = "Regularity of surface roughness with polishing time in electrolysis and plasma polishing",

abstract = "Surface roughness is the most important standard to measure the polishing effect. The mathematic model of surface roughness with polishing time in electrolysis and plasma polishing is established on the basis of the polishing mechanism in this paper. The roughness of the specimen with different polishing time was measured. Nonlinear fitting of the experimental data and the mathematic model is carried out, by which the mathematic model is improved. It is reasonable and feasible to use the improved mathematic model to fit the data and the adjusted coefficient of determination is 0.97139. Two other groups of experiments were done to verify the improved mathematic model is mainly in accordance with the actual polishing case.",

keywords = "Electrolyte, Mathematic model, Plasma polishing, Polishing time, Surface roughness",

author = "Ji Wang and Laichun Suo and Lili Guan and Yili Fu",

year = "2013",

month = feb,

doi = "10.3969/j.issn.1006-7043.201203060",

language = "英语",

volume = "34",

pages = "227--232",

journal = "Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University",

issn = "1006-7043",

publisher = "Editorial Board of Journal of Harbin Engineering",

number = "2",

}

TY - JOUR

T1 - Regularity of surface roughness with polishing time in electrolysis and plasma polishing

AU - Wang, Ji

AU - Suo, Laichun

AU - Guan, Lili

AU - Fu, Yili

PY - 2013/2

Y1 - 2013/2

N2 - Surface roughness is the most important standard to measure the polishing effect. The mathematic model of surface roughness with polishing time in electrolysis and plasma polishing is established on the basis of the polishing mechanism in this paper. The roughness of the specimen with different polishing time was measured. Nonlinear fitting of the experimental data and the mathematic model is carried out, by which the mathematic model is improved. It is reasonable and feasible to use the improved mathematic model to fit the data and the adjusted coefficient of determination is 0.97139. Two other groups of experiments were done to verify the improved mathematic model is mainly in accordance with the actual polishing case.

AB - Surface roughness is the most important standard to measure the polishing effect. The mathematic model of surface roughness with polishing time in electrolysis and plasma polishing is established on the basis of the polishing mechanism in this paper. The roughness of the specimen with different polishing time was measured. Nonlinear fitting of the experimental data and the mathematic model is carried out, by which the mathematic model is improved. It is reasonable and feasible to use the improved mathematic model to fit the data and the adjusted coefficient of determination is 0.97139. Two other groups of experiments were done to verify the improved mathematic model is mainly in accordance with the actual polishing case.

KW - Electrolyte

KW - Mathematic model

KW - Plasma polishing

KW - Polishing time

KW - Surface roughness

UR - https://www.scopus.com/pages/publications/84875600899

U2 - 10.3969/j.issn.1006-7043.201203060

DO - 10.3969/j.issn.1006-7043.201203060

M3 - 文章

AN - SCOPUS:84875600899

SN - 1006-7043

VL - 34

SP - 227

EP - 232

JO - Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University

JF - Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University

IS - 2

ER -

Regularity of surface roughness with polishing time in electrolysis and plasma polishing

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this