Particle Swarm Optimization-Based Parameter Design Method for S/CLC-Compensated IPT Systems Featuring High Tolerance to Misalignment and Load Variation

Inductive power transfer (IPT) systems designed with conventional methods offer optimum performance only at specific operational points. These methods are not applicable for dynamic IPT systems where both the coupling and load change throughout the operation. This study proposes a novel particle swarm optimization (PSO)-based parameter design method and aims to obtain a steady output voltage regardless of the coupling and load. The proposed method addresses the constraints of the conventional methods where the compensation capacitors/inductors are designed to resonate with certain other inductors/capacitors at the system's operational frequency. The S/CLC (primary series, secondary capacitor-inductor-capacitor) compensation topology is chosen in this research as it offers many appealing characteristics. The procedure to design an IPT system using the proposed method is presented. Two IPT systems, one designed with the proposed scheme and the other using conventional methods, are theoretically and experimentally compared in terms of fitness, voltage variation ripple (VVR), and power transfer efficiency (PTE). It is demonstrated that the fitness and the VVR of the conventional system are 1400.8% and 372.3% higher than those of the proposed system.