Optimum design of the control devices for adjacent structures under earthquake excitation

Jun Teng; Hongjun Liu

doi:10.1109/.2005.1467036

Optimum design of the control devices for adjacent structures under earthquake excitation

Jun Teng^*
, Hongjun Liu

^*Corresponding author for this work

Harbin Institute of Technology Shenzhen

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The design of the control devices for the control system of adjacent structures connected with control devices involves two aspects: the number and placement of the control devices and the control law or the parameters of the control devices. The performance index increment equation is established in this paper by using the conclusions of LQG problem at the condition of the control gain unchanged. Hence the optimum placement method is proved. The step reduced order method is used to overcome the defect of the control gain unchanging and it can be applied to the case in which only a few control devices are to be placed into the building with a large number of story units. The method proposed in this paper gives the optimum design of the number, the placement and the control law of the control devices at the same time.

Original language	English
Title of host publication	Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05
Pages	328-333
Number of pages	6
DOIs	https://doi.org/10.1109/.2005.1467036
State	Published - 2005
Externally published	Yes
Event	20th IEEE International Symposium on Intelligent Control, ISIC '05 and the13th Mediterranean Conference on Control and Automation, MED '05 - Limassol, Cyprus Duration: 27 Jun 2005 → 29 Jun 2005

Publication series

Name	Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05
Volume	2005

Conference

Conference	20th IEEE International Symposium on Intelligent Control, ISIC '05 and the13th Mediterranean Conference on Control and Automation, MED '05
Country/Territory	Cyprus
City	Limassol
Period	27/06/05 → 29/06/05

Keywords

Adjacent structures
Optimal placement
Suboptimal control gain

Access to Document

10.1109/.2005.1467036

Cite this

Teng, J., & Liu, H. (2005). Optimum design of the control devices for adjacent structures under earthquake excitation. In Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05 (pp. 328-333). Article 1467036 (Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05; Vol. 2005). https://doi.org/10.1109/.2005.1467036

Teng, Jun ; Liu, Hongjun. / Optimum design of the control devices for adjacent structures under earthquake excitation. Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05. 2005. pp. 328-333 (Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05).

@inproceedings{c73f645953ca498ea8cb2d5cbaf92d12,

title = "Optimum design of the control devices for adjacent structures under earthquake excitation",

abstract = "The design of the control devices for the control system of adjacent structures connected with control devices involves two aspects: the number and placement of the control devices and the control law or the parameters of the control devices. The performance index increment equation is established in this paper by using the conclusions of LQG problem at the condition of the control gain unchanged. Hence the optimum placement method is proved. The step reduced order method is used to overcome the defect of the control gain unchanging and it can be applied to the case in which only a few control devices are to be placed into the building with a large number of story units. The method proposed in this paper gives the optimum design of the number, the placement and the control law of the control devices at the same time.",

keywords = "Adjacent structures, Optimal placement, Suboptimal control gain",

author = "Jun Teng and Hongjun Liu",

year = "2005",

doi = "10.1109/.2005.1467036",

language = "英语",

isbn = "0780389360",

series = "Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05",

pages = "328--333",

booktitle = "Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05",

note = "20th IEEE International Symposium on Intelligent Control, ISIC '05 and the13th Mediterranean Conference on Control and Automation, MED '05 ; Conference date: 27-06-2005 Through 29-06-2005",

}

Teng, J & Liu, H 2005, Optimum design of the control devices for adjacent structures under earthquake excitation. in Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05., 1467036, Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05, vol. 2005, pp. 328-333, 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the13th Mediterranean Conference on Control and Automation, MED '05, Limassol, Cyprus, 27/06/05. https://doi.org/10.1109/.2005.1467036

Optimum design of the control devices for adjacent structures under earthquake excitation. / Teng, Jun; Liu, Hongjun.
Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05. 2005. p. 328-333 1467036 (Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05; Vol. 2005).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Optimum design of the control devices for adjacent structures under earthquake excitation

AU - Teng, Jun

AU - Liu, Hongjun

PY - 2005

Y1 - 2005

N2 - The design of the control devices for the control system of adjacent structures connected with control devices involves two aspects: the number and placement of the control devices and the control law or the parameters of the control devices. The performance index increment equation is established in this paper by using the conclusions of LQG problem at the condition of the control gain unchanged. Hence the optimum placement method is proved. The step reduced order method is used to overcome the defect of the control gain unchanging and it can be applied to the case in which only a few control devices are to be placed into the building with a large number of story units. The method proposed in this paper gives the optimum design of the number, the placement and the control law of the control devices at the same time.

AB - The design of the control devices for the control system of adjacent structures connected with control devices involves two aspects: the number and placement of the control devices and the control law or the parameters of the control devices. The performance index increment equation is established in this paper by using the conclusions of LQG problem at the condition of the control gain unchanged. Hence the optimum placement method is proved. The step reduced order method is used to overcome the defect of the control gain unchanging and it can be applied to the case in which only a few control devices are to be placed into the building with a large number of story units. The method proposed in this paper gives the optimum design of the number, the placement and the control law of the control devices at the same time.

KW - Adjacent structures

KW - Optimal placement

KW - Suboptimal control gain

UR - https://www.scopus.com/pages/publications/33745196279

U2 - 10.1109/.2005.1467036

DO - 10.1109/.2005.1467036

M3 - 会议稿件

AN - SCOPUS:33745196279

SN - 0780389360

SN - 9780780389366

T3 - Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05

SP - 328

EP - 333

BT - Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05

T2 - 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the13th Mediterranean Conference on Control and Automation, MED '05

Y2 - 27 June 2005 through 29 June 2005

ER -

Teng J, Liu H. Optimum design of the control devices for adjacent structures under earthquake excitation. In Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05. 2005. p. 328-333. 1467036. (Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05). doi: 10.1109/.2005.1467036

Optimum design of the control devices for adjacent structures under earthquake excitation

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this