Optimization on adsorber structures for asphalt fume from aluminum industries using CFD

Jianing Zhao; Bo Sun; Jing Liu; Mu Wan; Hongmin Cai

Optimization on adsorber structures for asphalt fume from aluminum industries using CFD

Jianing Zhao^*
, Bo Sun
, Jing Liu
, Mu Wan
, Hongmin Cai

^*Corresponding author for this work

School of Architecture and Design

Harbin Institute of Technology
Shenyang Aluminum and Magnesium Engineering and Research Institute

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Asphalt fume from Aluminum Industries is one of pollutants, which must be decontaminated in the ventilation systems. In this paper, two feasible structures of adsorbers were designed: the venturi-type adsorber with the small-diameter throat pipe and that with the flow-guiding cone. Then these two kinds of adsorbers were optimized according to the factors which influence the diffusion of the adsorbent particles. In the first adsorber, if the slope of increasing pipe is large enough and the positions of feeding pipe is appropriate, this adsorber will perform efficiently, but has more resistance loss; in the second adsorber, if those influencing factors adopt the optimal values, the adsorber will also take good effect and need less power to overcome resistance. The result shows the second adsorber is better.

Original language	English
Title of host publication	IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings
Subtitle of host publication	Sustainable Built Environment
Pages	257-264
Number of pages	8
State	Published - 2007
Event	6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, IAQVEC 2007 - Sendai, Japan Duration: 28 Oct 2007 → 31 Oct 2007

Publication series

Name	IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment
Volume	3

Conference

Conference	6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, IAQVEC 2007
Country/Territory	Japan
City	Sendai
Period	28/10/07 → 31/10/07

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Adsorber
Adsorption
Asphalt fume
CFD
Gas-solid flow

Cite this

Zhao, J., Sun, B., Liu, J., Wan, M., & Cai, H. (2007). Optimization on adsorber structures for asphalt fume from aluminum industries using CFD. In IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment (pp. 257-264). (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; Vol. 3).

Zhao, Jianing ; Sun, Bo ; Liu, Jing et al. / Optimization on adsorber structures for asphalt fume from aluminum industries using CFD. IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. 2007. pp. 257-264 (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment).

@inproceedings{de1bb0e6ce2c48249915013445368e57,

title = "Optimization on adsorber structures for asphalt fume from aluminum industries using CFD",

abstract = "Asphalt fume from Aluminum Industries is one of pollutants, which must be decontaminated in the ventilation systems. In this paper, two feasible structures of adsorbers were designed: the venturi-type adsorber with the small-diameter throat pipe and that with the flow-guiding cone. Then these two kinds of adsorbers were optimized according to the factors which influence the diffusion of the adsorbent particles. In the first adsorber, if the slope of increasing pipe is large enough and the positions of feeding pipe is appropriate, this adsorber will perform efficiently, but has more resistance loss; in the second adsorber, if those influencing factors adopt the optimal values, the adsorber will also take good effect and need less power to overcome resistance. The result shows the second adsorber is better.",

keywords = "Adsorber, Adsorption, Asphalt fume, CFD, Gas-solid flow",

author = "Jianing Zhao and Bo Sun and Jing Liu and Mu Wan and Hongmin Cai",

year = "2007",

language = "英语",

isbn = "9784861630729",

series = "IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment",

pages = "257--264",

booktitle = "IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings",

note = "6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, IAQVEC 2007 ; Conference date: 28-10-2007 Through 31-10-2007",

}

Zhao, J, Sun, B, Liu, J, Wan, M & Cai, H 2007, Optimization on adsorber structures for asphalt fume from aluminum industries using CFD. in IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, vol. 3, pp. 257-264, 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, IAQVEC 2007, Sendai, Japan, 28/10/07.

Optimization on adsorber structures for asphalt fume from aluminum industries using CFD. / Zhao, Jianing; Sun, Bo; Liu, Jing et al.
IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. 2007. p. 257-264 (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; Vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Optimization on adsorber structures for asphalt fume from aluminum industries using CFD

AU - Zhao, Jianing

AU - Sun, Bo

AU - Liu, Jing

AU - Wan, Mu

AU - Cai, Hongmin

PY - 2007

Y1 - 2007

N2 - Asphalt fume from Aluminum Industries is one of pollutants, which must be decontaminated in the ventilation systems. In this paper, two feasible structures of adsorbers were designed: the venturi-type adsorber with the small-diameter throat pipe and that with the flow-guiding cone. Then these two kinds of adsorbers were optimized according to the factors which influence the diffusion of the adsorbent particles. In the first adsorber, if the slope of increasing pipe is large enough and the positions of feeding pipe is appropriate, this adsorber will perform efficiently, but has more resistance loss; in the second adsorber, if those influencing factors adopt the optimal values, the adsorber will also take good effect and need less power to overcome resistance. The result shows the second adsorber is better.

AB - Asphalt fume from Aluminum Industries is one of pollutants, which must be decontaminated in the ventilation systems. In this paper, two feasible structures of adsorbers were designed: the venturi-type adsorber with the small-diameter throat pipe and that with the flow-guiding cone. Then these two kinds of adsorbers were optimized according to the factors which influence the diffusion of the adsorbent particles. In the first adsorber, if the slope of increasing pipe is large enough and the positions of feeding pipe is appropriate, this adsorber will perform efficiently, but has more resistance loss; in the second adsorber, if those influencing factors adopt the optimal values, the adsorber will also take good effect and need less power to overcome resistance. The result shows the second adsorber is better.

KW - Adsorber

KW - Adsorption

KW - Asphalt fume

KW - CFD

KW - Gas-solid flow

UR - https://www.scopus.com/pages/publications/84863136879

M3 - 会议稿件

AN - SCOPUS:84863136879

SN - 9784861630729

T3 - IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment

SP - 257

EP - 264

BT - IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings

T2 - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment, IAQVEC 2007

Y2 - 28 October 2007 through 31 October 2007

ER -

Zhao J, Sun B, Liu J, Wan M, Cai H. Optimization on adsorber structures for asphalt fume from aluminum industries using CFD. In IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. 2007. p. 257-264. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment).

Optimization on adsorber structures for asphalt fume from aluminum industries using CFD

Abstract

Publication series

Conference

UN SDGs

Keywords

Other files and links

Fingerprint

Cite this