Optimization analysis on gap size of molding for Pb-GF composite wire

Wen Bin Fang; Hong Fei Sun; Yao Hong Geng; Er De Wang; Fei Han

doi:10.1007/s11771-005-0194-7

Optimization analysis on gap size of molding for Pb-GF composite wire

Wen Bin Fang^*
, Hong Fei Sun
, Yao Hong Geng
, Er De Wang
, Fei Han

^*Corresponding author for this work

Harbin Institute of Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad extrusion of the brittle core clad by plastic metal materials. The results show that the gap size is a key parameter for the continuous clad extrusion and the molding speed. Its maximum value (H_max) is 0.24 mm and the minimum one (H_max) is 0.12 mm. At a gap size of 0.18 mm, the maximum of metal extrusion per unit of time and the optimal coating speed can be obtained.

Original language	English
Pages (from-to)	17-21
Number of pages	5
Journal	Journal of Central South University of Technology (English Edition)
Volume	12
Issue number	1
DOIs	https://doi.org/10.1007/s11771-005-0194-7
State	Published - Feb 2005
Externally published	Yes

Keywords

Composite wire
Extrusion
Gap size
Glass fiber
Lead

Access to Document

10.1007/s11771-005-0194-7

Cite this

@article{3893b48bf0fc4d08b980f31473f0ca01,

title = "Optimization analysis on gap size of molding for Pb-GF composite wire",

abstract = "Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad extrusion of the brittle core clad by plastic metal materials. The results show that the gap size is a key parameter for the continuous clad extrusion and the molding speed. Its maximum value (Hmax) is 0.24 mm and the minimum one (Hmax) is 0.12 mm. At a gap size of 0.18 mm, the maximum of metal extrusion per unit of time and the optimal coating speed can be obtained.",

keywords = "Composite wire, Extrusion, Gap size, Glass fiber, Lead",

author = "Fang, \{Wen Bin\} and Sun, \{Hong Fei\} and Geng, \{Yao Hong\} and Wang, \{Er De\} and Fei Han",

year = "2005",

month = feb,

doi = "10.1007/s11771-005-0194-7",

language = "英语",

volume = "12",

pages = "17--21",

journal = "Journal of Central South University of Technology (English Edition)",

issn = "1005-9784",

publisher = "Springer Science + Business Media",

number = "1",

}

TY - JOUR

T1 - Optimization analysis on gap size of molding for Pb-GF composite wire

AU - Fang, Wen Bin

AU - Sun, Hong Fei

AU - Geng, Yao Hong

AU - Wang, Er De

AU - Han, Fei

PY - 2005/2

Y1 - 2005/2

N2 - Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad extrusion of the brittle core clad by plastic metal materials. The results show that the gap size is a key parameter for the continuous clad extrusion and the molding speed. Its maximum value (Hmax) is 0.24 mm and the minimum one (Hmax) is 0.12 mm. At a gap size of 0.18 mm, the maximum of metal extrusion per unit of time and the optimal coating speed can be obtained.

AB - Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad extrusion of the brittle core clad by plastic metal materials. The results show that the gap size is a key parameter for the continuous clad extrusion and the molding speed. Its maximum value (Hmax) is 0.24 mm and the minimum one (Hmax) is 0.12 mm. At a gap size of 0.18 mm, the maximum of metal extrusion per unit of time and the optimal coating speed can be obtained.

KW - Composite wire

KW - Extrusion

KW - Gap size

KW - Glass fiber

KW - Lead

UR - https://www.scopus.com/pages/publications/17644373452

U2 - 10.1007/s11771-005-0194-7

DO - 10.1007/s11771-005-0194-7

M3 - 文章

AN - SCOPUS:17644373452

SN - 1005-9784

VL - 12

SP - 17

EP - 21

JO - Journal of Central South University of Technology (English Edition)

JF - Journal of Central South University of Technology (English Edition)

IS - 1

ER -

Optimization analysis on gap size of molding for Pb-GF composite wire

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this