Numerical Investigation of Confinement Effects on Ceiling Jet Development and Auto-Ignition Risks Using FDS: The Case of Impinging Propane Flames

This study presents a detailed numerical analysis of impinging propane flames within confined enclosures using the Fire Dynamics Simulator (FDS, v6.5.3). Two archetypal configurations were examined: (i) free buoyant plumes in unconfined environments, and (ii) ceiling-impinging flames under both open and confined conditions. The investigation encompassed a range of heat release rates (0.5–18.6 kW) and five degrees of ventilation confinement. The simulation results confirm that FDS reliably reproduces flame height evolution under free plume conditions, exhibiting strong consistency with Heskestad’s empirical correlation and available experimental benchmarks. Under ceiling impingement, confinement markedly influences the thermal field, the distribution of major gas species (O₂, CO₂, C₃H₈), and the accumulation of unburnt gas. Distinct from previous works primarily centered on unconfined plume dynamics, the present study systematically characterizes the onset of auto-ignition through combined lower flammability limit (LFL) and auto-ignition temperature (AIT) criteria for confined propane combustion. The highest auto-ignition risk was identified in partially confined configurations (Conf. 2 and Conf. 3) at an HRR of 18.6 kW, where unburnt propane concentrations locally exceeded the LFL (≈0.2%) and ceiling temperatures surpassed the AIT of propane (455 °C). The findings elucidate critical trade-offs between ventilation and safety. They also contribute to a validated FDS-based methodology for evaluating fire-induced flow structures, combustion behavior, and ignition hazards in confined spaces.