Numerical analysis on the performance of sodium chloride solution evaporative crystallization system driven by high-temperature heat pump

In the context of sustainable development, heat pump technology is increasingly recognized as a key method for enhancing the efficiency of evaporative crystallization processes. In this study, we propose a high-temperature heat pump evaporative crystallization system to facilitate the recycling of waste heat from secondary steam in low-vacuum and low-temperature evaporative crystallization, thereby achieving the cyclic utilization of condensation heat from secondary steam. The primary objective of this research is to develop a comprehensive mathematical model for the HPC system that investigate its operating performance under varying conditions, with the aim of promoting its practical application. The results demonstrate that by adjusting operating pressures, the temperature of the secondary steam can be controlled, allowing for regulation of the main particle size of the product. Specially, when maintaining the flow rate of the raw material liquid at 90 % of design condition, it is possible to achieve a maximum main particle size of 2.8 mm. Additionally, fluctuations in the flow rate of the raw material liquid significantly impact the cycle rate, with the optimum operating flow rate range identified as 75 % to 110 % of the rated value. The coefficient of performance of the system can achieve 5.85 under design conditions with a concentration of 4 % and flow rate of 310 kg/h. This research provides a theoretical foundation for the practical operation and commissioning of the HPC units.