Multiscale crystal plasticity finite element simulations of the deformation inhomogeneity of TiBw/TA15 composites with network-structured during hot rolling

Understanding the micromechanical responses during hot forming between TiB whiskers (TiBw) and matrix titanium alloy as well as grains is essential to effectively control the properties of the final products. In this work, a method to study the deformation inhomogeneity of network-structured TiBw/TA15 composites during rolling in high temperature single-phase regions at macro and micro scales was proposed. A crystal plastic finite element model with dislocation slip and grain boundary (GB) sliding as the deformation mechanism was established. Results showed that the discontinuous distribution of TiBw reinforcements along the GB reduced the strain difference between the network boundary region and the matrix region during high temperature deformation. Therefore, the plasticity of the composites was improved. For the high temperature β-phase, the {110}<111> with higher activity was the main deformation mode. The difference in stress distribution between the grains was caused by the different combinations of the “soft” and “hard” states of adjacent grains, which was determined by whether the value of Schmid factors was greater than 0.45. The local stress concentrations tended to spread at the interface of “soft-hard” grains. The TiBw reinforcements increased the GB strength and reduced the deformation difference between the GB and intragranular.