Microstructures and mechanical properties of heat-resistant HPDC Mg-4Al-based alloys containing cheap misch metal

Mg-4Al-xCe/La-0.3Mn (Ce/La: mixture of Ce and La, x=1, 2, 4 and 6wt.%) alloys were prepared by high-pressure die-casting. The microstructures, mechanical properties and thermal stability were investigated. The cross-section of test bar could be divided into the fine skin region and the relatively coarse interior region. Two binary Al-(Ce, La) phases with the former being the dominant one, Al₁₁(Ce, La)₃ and Al₂(Ce, La), are mainly distributed along the dendrite boundaries, and La prefers to exist in Al₁₁(Ce, La)₃. The alloy with 4wt.% Ce/La exhibits high tensile properties and good heat resistance until 200°C, which were mainly attributed to the fine dendritic arm spacing and the main strengthening phase Al₁₁(Ce, La)₃, which is present in high volume fraction, and possesses fine rod-like morphology, network or " orderly stack" distribution and good thermal stability. The results of this research provide a basis for further investigation of the new low cost high-pressure die-cast Mg-Al-RE alloys designed to serve at temperature up to 200°C.