Microstructure Evolution and Mechanical Properties of Spray-deposited Al-21. 47Si-4. 73Fe-2. 5Cu-0. 9Mg Alloy

Yan dong Jia; Fu Yang Cao; Pan Ma; Jing Shun Liu; Jian Fei Sun; Gang Wang

doi:10.1016/S1006-706X(16)30004-8

Microstructure Evolution and Mechanical Properties of Spray-deposited Al-21. 47Si-4. 73Fe-2. 5Cu-0. 9Mg Alloy

Yan dong Jia
, Fu Yang Cao
, Pan Ma
, Jing Shun Liu
, Jian Fei Sun
, Gang Wang^*

^*Corresponding author for this work

Shanghai University
Harbin Institute of Technology
Shanghai University of Engineering Science
Inner Mongolia University of Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

Al-Si-Fe-Cu-Mg alloy was prepared by spray deposition and was further processed by hot extrusion as well as T6 heat-treatment. The results indicate that the microstructure of the deposited alloy is composed of primary Si particles with average size of less than 5 μm, α-Al, Al₂ CuMg, β-Al₅ EeSi and δ-Al₄FeSi₂ (rectangular shape), and no eutectic silicon is found due to the special solidification behavior. The age hardening curves reveal two peaks. The uniform ultimate tensile strength (UTS) and the elongation of the peak-aged Al-Si-Fe-Cu-Mg alloy are 468. 3 MPa, 0.61% at 298 K and 267.4 MPa, 6.42% at 573 K, respectively. The fracture surfaces display brittle fracture morphology at 298 K, whereas it varies to mixture of brittle and ductile failure with increasing the temperature.

Original language	English
Pages (from-to)	14-18
Number of pages	5
Journal	Journal of Iron and Steel Research International
Volume	23
Issue number	1
DOIs	https://doi.org/10.1016/S1006-706X(16)30004-8
State	Published - 1 Jan 2016
Externally published	Yes

Keywords

Aging
Hypereutectic Al-Si alloy
Mechanical property
Microstructure
Spray deposition

Access to Document

10.1016/S1006-706X(16)30004-8

Cite this

@article{09399b9199544b678ae9264fa05c0421,

title = "Microstructure Evolution and Mechanical Properties of Spray-deposited Al-21. 47Si-4. 73Fe-2. 5Cu-0. 9Mg Alloy",

abstract = "Al-Si-Fe-Cu-Mg alloy was prepared by spray deposition and was further processed by hot extrusion as well as T6 heat-treatment. The results indicate that the microstructure of the deposited alloy is composed of primary Si particles with average size of less than 5 μm, α-Al, Al2 CuMg, β-Al5 EeSi and δ-Al4FeSi2 (rectangular shape), and no eutectic silicon is found due to the special solidification behavior. The age hardening curves reveal two peaks. The uniform ultimate tensile strength (UTS) and the elongation of the peak-aged Al-Si-Fe-Cu-Mg alloy are 468. 3 MPa, 0.61\% at 298 K and 267.4 MPa, 6.42\% at 573 K, respectively. The fracture surfaces display brittle fracture morphology at 298 K, whereas it varies to mixture of brittle and ductile failure with increasing the temperature.",

keywords = "Aging, Hypereutectic Al-Si alloy, Mechanical property, Microstructure, Spray deposition",

author = "Jia, \{Yan dong\} and Cao, \{Fu Yang\} and Pan Ma and Liu, \{Jing Shun\} and Sun, \{Jian Fei\} and Gang Wang",

note = "Publisher Copyright: {\textcopyright} 2016 Central Iron and Steel Research Institute.",

year = "2016",

month = jan,

day = "1",

doi = "10.1016/S1006-706X(16)30004-8",

language = "英语",

volume = "23",

pages = "14--18",

journal = "Journal of Iron and Steel Research International",

issn = "1006-706X",

publisher = "Springer International Publishing",

number = "1",

}

TY - JOUR

T1 - Microstructure Evolution and Mechanical Properties of Spray-deposited Al-21. 47Si-4. 73Fe-2. 5Cu-0. 9Mg Alloy

AU - Jia, Yan dong

AU - Cao, Fu Yang

AU - Ma, Pan

AU - Liu, Jing Shun

AU - Sun, Jian Fei

AU - Wang, Gang

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Al-Si-Fe-Cu-Mg alloy was prepared by spray deposition and was further processed by hot extrusion as well as T6 heat-treatment. The results indicate that the microstructure of the deposited alloy is composed of primary Si particles with average size of less than 5 μm, α-Al, Al2 CuMg, β-Al5 EeSi and δ-Al4FeSi2 (rectangular shape), and no eutectic silicon is found due to the special solidification behavior. The age hardening curves reveal two peaks. The uniform ultimate tensile strength (UTS) and the elongation of the peak-aged Al-Si-Fe-Cu-Mg alloy are 468. 3 MPa, 0.61% at 298 K and 267.4 MPa, 6.42% at 573 K, respectively. The fracture surfaces display brittle fracture morphology at 298 K, whereas it varies to mixture of brittle and ductile failure with increasing the temperature.

AB - Al-Si-Fe-Cu-Mg alloy was prepared by spray deposition and was further processed by hot extrusion as well as T6 heat-treatment. The results indicate that the microstructure of the deposited alloy is composed of primary Si particles with average size of less than 5 μm, α-Al, Al2 CuMg, β-Al5 EeSi and δ-Al4FeSi2 (rectangular shape), and no eutectic silicon is found due to the special solidification behavior. The age hardening curves reveal two peaks. The uniform ultimate tensile strength (UTS) and the elongation of the peak-aged Al-Si-Fe-Cu-Mg alloy are 468. 3 MPa, 0.61% at 298 K and 267.4 MPa, 6.42% at 573 K, respectively. The fracture surfaces display brittle fracture morphology at 298 K, whereas it varies to mixture of brittle and ductile failure with increasing the temperature.

KW - Aging

KW - Hypereutectic Al-Si alloy

KW - Mechanical property

KW - Microstructure

KW - Spray deposition

UR - https://www.scopus.com/pages/publications/84958775162

U2 - 10.1016/S1006-706X(16)30004-8

DO - 10.1016/S1006-706X(16)30004-8

M3 - 文章

AN - SCOPUS:84958775162

SN - 1006-706X

VL - 23

SP - 14

EP - 18

JO - Journal of Iron and Steel Research International

JF - Journal of Iron and Steel Research International

IS - 1

ER -

Microstructure Evolution and Mechanical Properties of Spray-deposited Al-21. 47Si-4. 73Fe-2. 5Cu-0. 9Mg Alloy

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this