Microstructure and anti-penetration performance of continuous gradient Ti/TiB–TiB2 composite fabricated by spark plasma sintering combined with tape casting

Biao Zhang; Zhaoxin Zhong; Jian Ye; Qiang Liu; Zhaoping Hou; Yicheng Jin; Haoqian Zhang; Yang Wang; Zhiguo Zhang; Feng Ye

doi:10.1016/j.ceramint.2019.12.125

Microstructure and anti-penetration performance of continuous gradient Ti/TiB–TiB₂ composite fabricated by spark plasma sintering combined with tape casting

Biao Zhang^*
, Zhaoxin Zhong
, Jian Ye
, Qiang Liu
, Zhaoping Hou
, Yicheng Jin
, Haoqian Zhang
, Yang Wang
, Zhiguo Zhang
, Feng Ye

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology
Taiyuan University of Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

15 Scopus citations

Abstract

Abrupt change of acoustic impedance at the interfaces of step gradient composites is the main reason which hinder their further improving of bulletproof performance. Eliminating these interfaces is an effective method to fundamentally solve this problem. In this study, continuous gradient Ti/TiB–TiB₂ composite was fabricated by spark plasma sintering (SPS) combined with tape casting. Interfaces between the different thin tape layers were successfully eliminated through the growth of rod-like TiB crystals during SPS sintering. High speed impact test indicates the continuous gradient Ti/TiB–TiB₂ composite not only possesses excellent anti-penetration performance, but also has the ability to resist a second strike.

Original language	English
Pages (from-to)	9957-9961
Number of pages	5
Journal	Ceramics International
Volume	46
Issue number	7
DOIs	https://doi.org/10.1016/j.ceramint.2019.12.125
State	Published - May 2020

Keywords

Armor material
Continuous gradient
Tape casting
Ti/TiB–TiB composite

Access to Document

10.1016/j.ceramint.2019.12.125

Cite this

@article{90432e204c1142168f7905211afbdcab,

title = "Microstructure and anti-penetration performance of continuous gradient Ti/TiB–TiB2 composite fabricated by spark plasma sintering combined with tape casting",

abstract = "Abrupt change of acoustic impedance at the interfaces of step gradient composites is the main reason which hinder their further improving of bulletproof performance. Eliminating these interfaces is an effective method to fundamentally solve this problem. In this study, continuous gradient Ti/TiB–TiB2 composite was fabricated by spark plasma sintering (SPS) combined with tape casting. Interfaces between the different thin tape layers were successfully eliminated through the growth of rod-like TiB crystals during SPS sintering. High speed impact test indicates the continuous gradient Ti/TiB–TiB2 composite not only possesses excellent anti-penetration performance, but also has the ability to resist a second strike.",

keywords = "Armor material, Continuous gradient, Tape casting, Ti/TiB–TiB composite",

author = "Biao Zhang and Zhaoxin Zhong and Jian Ye and Qiang Liu and Zhaoping Hou and Yicheng Jin and Haoqian Zhang and Yang Wang and Zhiguo Zhang and Feng Ye",

note = "Publisher Copyright: {\textcopyright} 2019 Elsevier Ltd and Techna Group S.r.l.",

year = "2020",

month = may,

doi = "10.1016/j.ceramint.2019.12.125",

language = "英语",

volume = "46",

pages = "9957--9961",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd",

number = "7",

}

TY - JOUR

T1 - Microstructure and anti-penetration performance of continuous gradient Ti/TiB–TiB2 composite fabricated by spark plasma sintering combined with tape casting

AU - Zhang, Biao

AU - Zhong, Zhaoxin

AU - Ye, Jian

AU - Liu, Qiang

AU - Hou, Zhaoping

AU - Jin, Yicheng

AU - Zhang, Haoqian

AU - Wang, Yang

AU - Zhang, Zhiguo

AU - Ye, Feng

PY - 2020/5

Y1 - 2020/5

N2 - Abrupt change of acoustic impedance at the interfaces of step gradient composites is the main reason which hinder their further improving of bulletproof performance. Eliminating these interfaces is an effective method to fundamentally solve this problem. In this study, continuous gradient Ti/TiB–TiB2 composite was fabricated by spark plasma sintering (SPS) combined with tape casting. Interfaces between the different thin tape layers were successfully eliminated through the growth of rod-like TiB crystals during SPS sintering. High speed impact test indicates the continuous gradient Ti/TiB–TiB2 composite not only possesses excellent anti-penetration performance, but also has the ability to resist a second strike.

AB - Abrupt change of acoustic impedance at the interfaces of step gradient composites is the main reason which hinder their further improving of bulletproof performance. Eliminating these interfaces is an effective method to fundamentally solve this problem. In this study, continuous gradient Ti/TiB–TiB2 composite was fabricated by spark plasma sintering (SPS) combined with tape casting. Interfaces between the different thin tape layers were successfully eliminated through the growth of rod-like TiB crystals during SPS sintering. High speed impact test indicates the continuous gradient Ti/TiB–TiB2 composite not only possesses excellent anti-penetration performance, but also has the ability to resist a second strike.

KW - Armor material

KW - Continuous gradient

KW - Tape casting

KW - Ti/TiB–TiB composite

UR - https://www.scopus.com/pages/publications/85076523314

U2 - 10.1016/j.ceramint.2019.12.125

DO - 10.1016/j.ceramint.2019.12.125

M3 - 文章

AN - SCOPUS:85076523314

SN - 0272-8842

VL - 46

SP - 9957

EP - 9961

JO - Ceramics International

JF - Ceramics International

IS - 7

ER -

Microstructure and anti-penetration performance of continuous gradient Ti/TiB–TiB₂ composite fabricated by spark plasma sintering combined with tape casting

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this