Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics

Xuan Su; Wang Tao; Yanbin Chen; Xi Chen; Ze Tian

doi:10.1016/j.matlet.2017.02.102

Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics

Xuan Su
, Wang Tao^*
, Yanbin Chen
, Xi Chen
, Ze Tian

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

39 Scopus citations

Abstract

TC4 coating was successfully prepared on the surface of carbon fiber reinforced thermoplastics (CFRP) via laser cladding technology. The microstructure of the TC4 coating/CFRP substrate interface was analyzed. The results indicated that the molten TC4 infiltrated into the CFRP substrate and reliable bonding of TC4 coating and CFRP substrate was obtained. TiC and a small amount of TiS₂ phases were formed at the interface between TC4 coating and CFRP substrate. In addition, the process for preparing TC4 coating on the surface of CFRP substrate and the bonding mechanism at the interface was put forward based on the basis of experimental observation and theoretical analysis.

Original language	English
Pages (from-to)	228-231
Number of pages	4
Journal	Materials Letters
Volume	195
DOIs	https://doi.org/10.1016/j.matlet.2017.02.102
State	Published - 15 May 2017

Keywords

Bonding mechanism
CFRP
Laser cladding
Microstructure
Surfaces

Access to Document

10.1016/j.matlet.2017.02.102

Cite this

@article{05e5390a09a14bc6b9d6660d6b8f50cb,

title = "Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics",

abstract = "TC4 coating was successfully prepared on the surface of carbon fiber reinforced thermoplastics (CFRP) via laser cladding technology. The microstructure of the TC4 coating/CFRP substrate interface was analyzed. The results indicated that the molten TC4 infiltrated into the CFRP substrate and reliable bonding of TC4 coating and CFRP substrate was obtained. TiC and a small amount of TiS2 phases were formed at the interface between TC4 coating and CFRP substrate. In addition, the process for preparing TC4 coating on the surface of CFRP substrate and the bonding mechanism at the interface was put forward based on the basis of experimental observation and theoretical analysis.",

keywords = "Bonding mechanism, CFRP, Laser cladding, Microstructure, Surfaces",

author = "Xuan Su and Wang Tao and Yanbin Chen and Xi Chen and Ze Tian",

note = "Publisher Copyright: {\textcopyright} 2017",

year = "2017",

month = may,

day = "15",

doi = "10.1016/j.matlet.2017.02.102",

language = "英语",

volume = "195",

pages = "228--231",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics

AU - Su, Xuan

AU - Tao, Wang

AU - Chen, Yanbin

AU - Chen, Xi

AU - Tian, Ze

PY - 2017/5/15

Y1 - 2017/5/15

N2 - TC4 coating was successfully prepared on the surface of carbon fiber reinforced thermoplastics (CFRP) via laser cladding technology. The microstructure of the TC4 coating/CFRP substrate interface was analyzed. The results indicated that the molten TC4 infiltrated into the CFRP substrate and reliable bonding of TC4 coating and CFRP substrate was obtained. TiC and a small amount of TiS2 phases were formed at the interface between TC4 coating and CFRP substrate. In addition, the process for preparing TC4 coating on the surface of CFRP substrate and the bonding mechanism at the interface was put forward based on the basis of experimental observation and theoretical analysis.

AB - TC4 coating was successfully prepared on the surface of carbon fiber reinforced thermoplastics (CFRP) via laser cladding technology. The microstructure of the TC4 coating/CFRP substrate interface was analyzed. The results indicated that the molten TC4 infiltrated into the CFRP substrate and reliable bonding of TC4 coating and CFRP substrate was obtained. TiC and a small amount of TiS2 phases were formed at the interface between TC4 coating and CFRP substrate. In addition, the process for preparing TC4 coating on the surface of CFRP substrate and the bonding mechanism at the interface was put forward based on the basis of experimental observation and theoretical analysis.

KW - Bonding mechanism

KW - CFRP

KW - Laser cladding

KW - Microstructure

KW - Surfaces

UR - https://www.scopus.com/pages/publications/85014864291

U2 - 10.1016/j.matlet.2017.02.102

DO - 10.1016/j.matlet.2017.02.102

M3 - 文章

AN - SCOPUS:85014864291

SN - 0167-577X

VL - 195

SP - 228

EP - 231

JO - Materials Letters

JF - Materials Letters

ER -

Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this