Micro-punching process of stainless steel foil with micro-die fabricated by micro-EDM

Jie Xu; Bin Guo; Debin Shan; Zhenlong Wang; Mingxing Li; Xiang Fei

doi:10.1007/s00542-013-1768-1

Micro-punching process of stainless steel foil with micro-die fabricated by micro-EDM

Jie Xu^*
, Bin Guo
, Debin Shan
, Zhenlong Wang
, Mingxing Li
, Xiang Fei

^*Corresponding author for this work

School of Mechatronics Engineering, Harbin Institute of Technology
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

17 Scopus citations

Abstract

Micro-punching has become a potential micro-manufacturing process due to the simplicity of the process, low cost, high production capability and accuracy. But the size of a punched micro-hole is limited due to the difficulties of tool fabrication. In the paper, we propose a design procedure according to buckling theory and a kind of micro-die fabrication method for micro-punching process. Micro-punch and female die with high dimensional accuracy were fabricated by micro-EDM with block electrode. Micro-punching processes of stainless steel foil were conducted with the micro-punch and female die equipped in the precision micro-punching tool. Micro-holes of 300, 150 and 100 μm in diameter were pierced with a good profile and high dimensional accuracy, which indicate that the micro-die fabricated by micro-EDM is suitable for micro-punching processes.

Original language	English
Pages (from-to)	83-89
Number of pages	7
Journal	Microsystem Technologies
Volume	20
Issue number	1
DOIs	https://doi.org/10.1007/s00542-013-1768-1
State	Published - Jan 2014

Access to Document

10.1007/s00542-013-1768-1

Cite this

@article{1c928335770f48c2b8b106e2061f29e7,

title = "Micro-punching process of stainless steel foil with micro-die fabricated by micro-EDM",

abstract = "Micro-punching has become a potential micro-manufacturing process due to the simplicity of the process, low cost, high production capability and accuracy. But the size of a punched micro-hole is limited due to the difficulties of tool fabrication. In the paper, we propose a design procedure according to buckling theory and a kind of micro-die fabrication method for micro-punching process. Micro-punch and female die with high dimensional accuracy were fabricated by micro-EDM with block electrode. Micro-punching processes of stainless steel foil were conducted with the micro-punch and female die equipped in the precision micro-punching tool. Micro-holes of 300, 150 and 100 μm in diameter were pierced with a good profile and high dimensional accuracy, which indicate that the micro-die fabricated by micro-EDM is suitable for micro-punching processes.",

author = "Jie Xu and Bin Guo and Debin Shan and Zhenlong Wang and Mingxing Li and Xiang Fei",

year = "2014",

month = jan,

doi = "10.1007/s00542-013-1768-1",

language = "英语",

volume = "20",

pages = "83--89",

journal = "Microsystem Technologies",

issn = "0946-7076",

publisher = "Springer Science and Business Media Deutschland GmbH",

number = "1",

}

TY - JOUR

T1 - Micro-punching process of stainless steel foil with micro-die fabricated by micro-EDM

AU - Xu, Jie

AU - Guo, Bin

AU - Shan, Debin

AU - Wang, Zhenlong

AU - Li, Mingxing

AU - Fei, Xiang

PY - 2014/1

Y1 - 2014/1

N2 - Micro-punching has become a potential micro-manufacturing process due to the simplicity of the process, low cost, high production capability and accuracy. But the size of a punched micro-hole is limited due to the difficulties of tool fabrication. In the paper, we propose a design procedure according to buckling theory and a kind of micro-die fabrication method for micro-punching process. Micro-punch and female die with high dimensional accuracy were fabricated by micro-EDM with block electrode. Micro-punching processes of stainless steel foil were conducted with the micro-punch and female die equipped in the precision micro-punching tool. Micro-holes of 300, 150 and 100 μm in diameter were pierced with a good profile and high dimensional accuracy, which indicate that the micro-die fabricated by micro-EDM is suitable for micro-punching processes.

AB - Micro-punching has become a potential micro-manufacturing process due to the simplicity of the process, low cost, high production capability and accuracy. But the size of a punched micro-hole is limited due to the difficulties of tool fabrication. In the paper, we propose a design procedure according to buckling theory and a kind of micro-die fabrication method for micro-punching process. Micro-punch and female die with high dimensional accuracy were fabricated by micro-EDM with block electrode. Micro-punching processes of stainless steel foil were conducted with the micro-punch and female die equipped in the precision micro-punching tool. Micro-holes of 300, 150 and 100 μm in diameter were pierced with a good profile and high dimensional accuracy, which indicate that the micro-die fabricated by micro-EDM is suitable for micro-punching processes.

UR - https://www.scopus.com/pages/publications/84892574189

U2 - 10.1007/s00542-013-1768-1

DO - 10.1007/s00542-013-1768-1

M3 - 文章

AN - SCOPUS:84892574189

SN - 0946-7076

VL - 20

SP - 83

EP - 89

JO - Microsystem Technologies

JF - Microsystem Technologies

IS - 1

ER -

Micro-punching process of stainless steel foil with micro-die fabricated by micro-EDM

Abstract

Access to Document

Other files and links

Fingerprint

Cite this