Mechanism study on cutting surface effection in vibratory low frequency cutting

Fuqiang Tong; Feihu Zhang; Guangjun Chen; Lizhi Gu; Peng Sun

Mechanism study on cutting surface effection in vibratory low frequency cutting

Fuqiang Tong^*
, Feihu Zhang
, Guangjun Chen
, Lizhi Gu
, Peng Sun

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology
Jiamusi University
Huaqiao University
Heilongjiang Agriculture and Secondary Product Processing Mechanization Research Institute

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

In order to study deeply factors of cutting surface effection in vibratory cutting, the experiment system of the vibration cutting with low frequency is tried and established. This system consists of a vibrating source-micro-drive tool holder powered by piezoelectric ceramic under the control of computer, and a feedback signal reading device for parameters of the real movement of the tool tip in order to correct the assumed theoretical parameters. In progress of low frequency vibration cutting and common cutting experiment under the same cutter geometry parameters condition, inferring the influence of the different vibration frequency, different cutting velcocit to cutting process and result, and comparing with common cutting experiment in the same cutting amount condition. When cutting velocity v meets v<v_c = 2πAf, it can reach nicer effect.

Original language	English
Pages (from-to)	68-70
Number of pages	3
Journal	Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)
Volume	35
Issue number	SUPPL. 1
State	Published - Mar 2007

Keywords

Cutting velocity
Vibratory cutting
Vibratory frequency

Cite this

@article{3303686da35c455d844b7bc63e43a8f3,

title = "Mechanism study on cutting surface effection in vibratory low frequency cutting",

abstract = "In order to study deeply factors of cutting surface effection in vibratory cutting, the experiment system of the vibration cutting with low frequency is tried and established. This system consists of a vibrating source-micro-drive tool holder powered by piezoelectric ceramic under the control of computer, and a feedback signal reading device for parameters of the real movement of the tool tip in order to correct the assumed theoretical parameters. In progress of low frequency vibration cutting and common cutting experiment under the same cutter geometry parameters condition, inferring the influence of the different vibration frequency, different cutting velcocit to cutting process and result, and comparing with common cutting experiment in the same cutting amount condition. When cutting velocity v meets vc = 2πAf, it can reach nicer effect.",

keywords = "Cutting velocity, Vibratory cutting, Vibratory frequency",

author = "Fuqiang Tong and Feihu Zhang and Guangjun Chen and Lizhi Gu and Peng Sun",

year = "2007",

month = mar,

language = "英语",

volume = "35",

pages = "68--70",

journal = "Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)",

issn = "1671-4512",

publisher = "Huazhong University of Science and Technology",

number = "SUPPL. 1",

}

Mechanism study on cutting surface effection in vibratory low frequency cutting. / Tong, Fuqiang; Zhang, Feihu; Chen, Guangjun et al.
In: Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), Vol. 35, No. SUPPL. 1, 03.2007, p. 68-70.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Mechanism study on cutting surface effection in vibratory low frequency cutting

AU - Tong, Fuqiang

AU - Zhang, Feihu

AU - Chen, Guangjun

AU - Gu, Lizhi

AU - Sun, Peng

PY - 2007/3

Y1 - 2007/3

N2 - In order to study deeply factors of cutting surface effection in vibratory cutting, the experiment system of the vibration cutting with low frequency is tried and established. This system consists of a vibrating source-micro-drive tool holder powered by piezoelectric ceramic under the control of computer, and a feedback signal reading device for parameters of the real movement of the tool tip in order to correct the assumed theoretical parameters. In progress of low frequency vibration cutting and common cutting experiment under the same cutter geometry parameters condition, inferring the influence of the different vibration frequency, different cutting velcocit to cutting process and result, and comparing with common cutting experiment in the same cutting amount condition. When cutting velocity v meets vc = 2πAf, it can reach nicer effect.

AB - In order to study deeply factors of cutting surface effection in vibratory cutting, the experiment system of the vibration cutting with low frequency is tried and established. This system consists of a vibrating source-micro-drive tool holder powered by piezoelectric ceramic under the control of computer, and a feedback signal reading device for parameters of the real movement of the tool tip in order to correct the assumed theoretical parameters. In progress of low frequency vibration cutting and common cutting experiment under the same cutter geometry parameters condition, inferring the influence of the different vibration frequency, different cutting velcocit to cutting process and result, and comparing with common cutting experiment in the same cutting amount condition. When cutting velocity v meets vc = 2πAf, it can reach nicer effect.

KW - Cutting velocity

KW - Vibratory cutting

KW - Vibratory frequency

UR - https://www.scopus.com/pages/publications/34248630832

M3 - 文章

AN - SCOPUS:34248630832

SN - 1671-4512

VL - 35

SP - 68

EP - 70

JO - Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)

JF - Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)

IS - SUPPL. 1

ER -

Mechanism study on cutting surface effection in vibratory low frequency cutting

Abstract

Keywords

Other files and links

Fingerprint

Cite this