Investigation on microstructure and corrosion resistance of rare earth-doped electrodeposition Ni coatings

Limin Chang; Maozhong An; Mingshuo Ma

Investigation on microstructure and corrosion resistance of rare earth-doped electrodeposition Ni coatings

Limin Chang^*
, Maozhong An
, Mingshuo Ma

^*Corresponding author for this work

School of Chemistry and Chemical Engineering

Harbin Institute of Technology
Jilin Normal University

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.

Original language	English
Pages (from-to)	456-459
Number of pages	4
Journal	Journal of Rare Earths
Volume	23
Issue number	SUPPL. 3
State	Published - Dec 2005

Keywords

Corrosion resistance
Electrodeposition
Ni coatings
Rare earths

Cite this

@article{2853d2bf269848ee89386e181981bd60,

title = "Investigation on microstructure and corrosion resistance of rare earth-doped electrodeposition Ni coatings",

abstract = "The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.",

keywords = "Corrosion resistance, Electrodeposition, Ni coatings, Rare earths",

author = "Limin Chang and Maozhong An and Mingshuo Ma",

year = "2005",

month = dec,

language = "英语",

volume = "23",

pages = "456--459",

journal = "Journal of Rare Earths",

issn = "1002-0721",

publisher = "Editorial Office of Chinese Rare Earths",

number = "SUPPL. 3",

}

TY - JOUR

T1 - Investigation on microstructure and corrosion resistance of rare earth-doped electrodeposition Ni coatings

AU - Chang, Limin

AU - An, Maozhong

AU - Ma, Mingshuo

PY - 2005/12

Y1 - 2005/12

N2 - The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.

AB - The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.

KW - Corrosion resistance

KW - Electrodeposition

KW - Ni coatings

KW - Rare earths

UR - https://www.scopus.com/pages/publications/33646718244

M3 - 文章

AN - SCOPUS:33646718244

SN - 1002-0721

VL - 23

SP - 456

EP - 459

JO - Journal of Rare Earths

JF - Journal of Rare Earths

IS - SUPPL. 3

ER -

Investigation on microstructure and corrosion resistance of rare earth-doped electrodeposition Ni coatings

Abstract

Keywords

Other files and links

Fingerprint

Cite this