Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys

Y. Feng; J. H. Sui; Z. Y. Gao; J. Zhang; W. Cai

doi:10.1016/j.msea.2008.12.003

Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys

Y. Feng
, J. H. Sui
, Z. Y. Gao
, J. Zhang
, W. Cai^*

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

50 Scopus citations

Abstract

Ni-Mn-In alloys are doped by Fe in order to improve the ductility of this intermetallic. The phase transformation behavior, microstructures and mechanical properties of Ni₅₀Mn₃₄In_{16 - y}Fe_y (y = 0, 2, 3, 4, 5, 8) alloys are investigated in this paper. The phase transformation temperatures increase with the increase of Fe content, and some second phase particles appear both along the grain boundaries and inside the grains after being doped 5 at.% and 8 at.% Fe. The compressive strength and maximum compressive strain reach up to 1200 MPa and 15.8% for amounts higher than 8 at.% Fe. In addition, the fracture type changes from typical intergranular crack to transgranular crack gradually with the increase of Fe content.

Original language	English
Pages (from-to)	174-178
Number of pages	5
Journal	Materials Science and Engineering: A
Volume	507
Issue number	1-2
DOIs	https://doi.org/10.1016/j.msea.2008.12.003
State	Published - 15 May 2009
Externally published	Yes

Keywords

Brittleness and ductility
Intermetallics
Microstructure
Phase transformation
Precipitates

Access to Document

10.1016/j.msea.2008.12.003

Cite this

@article{d875cfd3d6a54becaaf3c49759833312,

title = "Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys",

abstract = "Ni-Mn-In alloys are doped by Fe in order to improve the ductility of this intermetallic. The phase transformation behavior, microstructures and mechanical properties of Ni50Mn34In16 - yFey (y = 0, 2, 3, 4, 5, 8) alloys are investigated in this paper. The phase transformation temperatures increase with the increase of Fe content, and some second phase particles appear both along the grain boundaries and inside the grains after being doped 5 at.\% and 8 at.\% Fe. The compressive strength and maximum compressive strain reach up to 1200 MPa and 15.8\% for amounts higher than 8 at.\% Fe. In addition, the fracture type changes from typical intergranular crack to transgranular crack gradually with the increase of Fe content.",

keywords = "Brittleness and ductility, Intermetallics, Microstructure, Phase transformation, Precipitates",

author = "Y. Feng and Sui, \{J. H.\} and Gao, \{Z. Y.\} and J. Zhang and W. Cai",

year = "2009",

month = may,

day = "15",

doi = "10.1016/j.msea.2008.12.003",

language = "英语",

volume = "507",

pages = "174--178",

journal = "Materials Science and Engineering: A",

issn = "0921-5093",

publisher = "Elsevier Ltd",

number = "1-2",

}

TY - JOUR

T1 - Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys

AU - Feng, Y.

AU - Sui, J. H.

AU - Gao, Z. Y.

AU - Zhang, J.

AU - Cai, W.

PY - 2009/5/15

Y1 - 2009/5/15

N2 - Ni-Mn-In alloys are doped by Fe in order to improve the ductility of this intermetallic. The phase transformation behavior, microstructures and mechanical properties of Ni50Mn34In16 - yFey (y = 0, 2, 3, 4, 5, 8) alloys are investigated in this paper. The phase transformation temperatures increase with the increase of Fe content, and some second phase particles appear both along the grain boundaries and inside the grains after being doped 5 at.% and 8 at.% Fe. The compressive strength and maximum compressive strain reach up to 1200 MPa and 15.8% for amounts higher than 8 at.% Fe. In addition, the fracture type changes from typical intergranular crack to transgranular crack gradually with the increase of Fe content.

AB - Ni-Mn-In alloys are doped by Fe in order to improve the ductility of this intermetallic. The phase transformation behavior, microstructures and mechanical properties of Ni50Mn34In16 - yFey (y = 0, 2, 3, 4, 5, 8) alloys are investigated in this paper. The phase transformation temperatures increase with the increase of Fe content, and some second phase particles appear both along the grain boundaries and inside the grains after being doped 5 at.% and 8 at.% Fe. The compressive strength and maximum compressive strain reach up to 1200 MPa and 15.8% for amounts higher than 8 at.% Fe. In addition, the fracture type changes from typical intergranular crack to transgranular crack gradually with the increase of Fe content.

KW - Brittleness and ductility

KW - Intermetallics

KW - Microstructure

KW - Phase transformation

KW - Precipitates

UR - https://www.scopus.com/pages/publications/61649086398

U2 - 10.1016/j.msea.2008.12.003

DO - 10.1016/j.msea.2008.12.003

M3 - 文章

AN - SCOPUS:61649086398

SN - 0921-5093

VL - 507

SP - 174

EP - 178

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

IS - 1-2

ER -

Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this