Interface structure and mechanical properties of the TiAl/42CrMo steel joint vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal

Yulong Li; Peng He; Jicai Feng

doi:10.1016/j.scriptamat.2006.03.055

Interface structure and mechanical properties of the TiAl/42CrMo steel joint vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal

Yulong Li^*
, Peng He
, Jicai Feng

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

63 Scopus citations

Abstract

TiAl and 42CrMo steel were vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal. The joint interface was divided into three distinct zones, including the reaction layer near TiAl, the central zone, and the TiC reaction layer adjacent to the steel. During brazing, AlCu₂Ti, AlCuTi and TiC phase formed quickly with an increase in brazing temperature or brazing time. By comparing the brazing conditions and joint strengths, the optimum brazing parameters were obtained. When brazed at 900 °C for 5 min, the room temperature tensile strength and shear strength of the joint were 347 MPa and 229 MPa, respectively.

Original language	English
Pages (from-to)	171-174
Number of pages	4
Journal	Scripta Materialia
Volume	55
Issue number	2
DOIs	https://doi.org/10.1016/j.scriptamat.2006.03.055
State	Published - Jul 2006

Keywords

Brazing
Interface structure
Mechanical properties
TiAl

Access to Document

10.1016/j.scriptamat.2006.03.055

Cite this

@article{5a0d7a4995a0458bbf38b00578546e14,

title = "Interface structure and mechanical properties of the TiAl/42CrMo steel joint vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal",

abstract = "TiAl and 42CrMo steel were vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal. The joint interface was divided into three distinct zones, including the reaction layer near TiAl, the central zone, and the TiC reaction layer adjacent to the steel. During brazing, AlCu2Ti, AlCuTi and TiC phase formed quickly with an increase in brazing temperature or brazing time. By comparing the brazing conditions and joint strengths, the optimum brazing parameters were obtained. When brazed at 900 °C for 5 min, the room temperature tensile strength and shear strength of the joint were 347 MPa and 229 MPa, respectively.",

keywords = "Brazing, Interface structure, Mechanical properties, TiAl",

author = "Yulong Li and Peng He and Jicai Feng",

year = "2006",

month = jul,

doi = "10.1016/j.scriptamat.2006.03.055",

language = "英语",

volume = "55",

pages = "171--174",

journal = "Scripta Materialia",

issn = "1359-6462",

publisher = "Acta Materialia Inc",

number = "2",

}

TY - JOUR

T1 - Interface structure and mechanical properties of the TiAl/42CrMo steel joint vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal

AU - Li, Yulong

AU - He, Peng

AU - Feng, Jicai

PY - 2006/7

Y1 - 2006/7

N2 - TiAl and 42CrMo steel were vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal. The joint interface was divided into three distinct zones, including the reaction layer near TiAl, the central zone, and the TiC reaction layer adjacent to the steel. During brazing, AlCu2Ti, AlCuTi and TiC phase formed quickly with an increase in brazing temperature or brazing time. By comparing the brazing conditions and joint strengths, the optimum brazing parameters were obtained. When brazed at 900 °C for 5 min, the room temperature tensile strength and shear strength of the joint were 347 MPa and 229 MPa, respectively.

AB - TiAl and 42CrMo steel were vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal. The joint interface was divided into three distinct zones, including the reaction layer near TiAl, the central zone, and the TiC reaction layer adjacent to the steel. During brazing, AlCu2Ti, AlCuTi and TiC phase formed quickly with an increase in brazing temperature or brazing time. By comparing the brazing conditions and joint strengths, the optimum brazing parameters were obtained. When brazed at 900 °C for 5 min, the room temperature tensile strength and shear strength of the joint were 347 MPa and 229 MPa, respectively.

KW - Brazing

KW - Interface structure

KW - Mechanical properties

KW - TiAl

UR - https://www.scopus.com/pages/publications/33747467214

U2 - 10.1016/j.scriptamat.2006.03.055

DO - 10.1016/j.scriptamat.2006.03.055

M3 - 文章

AN - SCOPUS:33747467214

SN - 1359-6462

VL - 55

SP - 171

EP - 174

JO - Scripta Materialia

JF - Scripta Materialia

IS - 2

ER -

Interface structure and mechanical properties of the TiAl/42CrMo steel joint vacuum brazed with Ag-Cu/Ti/Ag-Cu filler metal

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this