Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel

Fangjun Xu; Guangze Tang; Guangwei Guo; Xinxin Ma; G. E. Ozur

doi:10.1016/j.nimb.2010.04.019

Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel

Fangjun Xu
, Guangze Tang
, Guangwei Guo
, Xinxin Ma^*
, G. E. Ozur

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology
Daqing Petroleum Institute
Institute of High Current Electronics of the Siberian Branch of the Russian Academy of Sciences

Research output: Contribution to journal › Article › peer-review

51 Scopus citations

Abstract

The influence of high current pulsed electron beam (HCPEB) irradiation numbers on the microstructure, wear and corrosion resistance properties of M50 steel was studied. The crystallize phase, surface morphology, hardness, oxidation wear and corrosion resistance of samples were analyzed using XRD, SEM, nanoindenter, wear tester and electrochemical corrosion tests. The results reveal that the hardness and wear resistance of irradiated samples decrease compared with untreated sample because of the increasing of austenite content in the melted layer; while the corrosion resistance of irradiated samples is higher than untreated sample.

Original language	English
Pages (from-to)	2395-2399
Number of pages	5
Journal	Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
Volume	268
Issue number	15
DOIs	https://doi.org/10.1016/j.nimb.2010.04.019
State	Published - 1 Aug 2010

Keywords

Corrosion resistance
High current pulsed electron beam
M50 steel
Oxidation wear

Access to Document

10.1016/j.nimb.2010.04.019

Cite this

@article{546f763bc0eb4230854e1d0c26441dbe,

title = "Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel",

abstract = "The influence of high current pulsed electron beam (HCPEB) irradiation numbers on the microstructure, wear and corrosion resistance properties of M50 steel was studied. The crystallize phase, surface morphology, hardness, oxidation wear and corrosion resistance of samples were analyzed using XRD, SEM, nanoindenter, wear tester and electrochemical corrosion tests. The results reveal that the hardness and wear resistance of irradiated samples decrease compared with untreated sample because of the increasing of austenite content in the melted layer; while the corrosion resistance of irradiated samples is higher than untreated sample.",

keywords = "Corrosion resistance, High current pulsed electron beam, M50 steel, Oxidation wear",

author = "Fangjun Xu and Guangze Tang and Guangwei Guo and Xinxin Ma and Ozur, \{G. E.\}",

year = "2010",

month = aug,

day = "1",

doi = "10.1016/j.nimb.2010.04.019",

language = "英语",

volume = "268",

pages = "2395--2399",

journal = "Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms",

issn = "0168-583X",

publisher = "Elsevier B.V.",

number = "15",

}

Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel. / Xu, Fangjun; Tang, Guangze; Guo, Guangwei et al.
In: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 268, No. 15, 01.08.2010, p. 2395-2399.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel

AU - Xu, Fangjun

AU - Tang, Guangze

AU - Guo, Guangwei

AU - Ma, Xinxin

AU - Ozur, G. E.

PY - 2010/8/1

Y1 - 2010/8/1

N2 - The influence of high current pulsed electron beam (HCPEB) irradiation numbers on the microstructure, wear and corrosion resistance properties of M50 steel was studied. The crystallize phase, surface morphology, hardness, oxidation wear and corrosion resistance of samples were analyzed using XRD, SEM, nanoindenter, wear tester and electrochemical corrosion tests. The results reveal that the hardness and wear resistance of irradiated samples decrease compared with untreated sample because of the increasing of austenite content in the melted layer; while the corrosion resistance of irradiated samples is higher than untreated sample.

AB - The influence of high current pulsed electron beam (HCPEB) irradiation numbers on the microstructure, wear and corrosion resistance properties of M50 steel was studied. The crystallize phase, surface morphology, hardness, oxidation wear and corrosion resistance of samples were analyzed using XRD, SEM, nanoindenter, wear tester and electrochemical corrosion tests. The results reveal that the hardness and wear resistance of irradiated samples decrease compared with untreated sample because of the increasing of austenite content in the melted layer; while the corrosion resistance of irradiated samples is higher than untreated sample.

KW - Corrosion resistance

KW - High current pulsed electron beam

KW - M50 steel

KW - Oxidation wear

UR - https://www.scopus.com/pages/publications/77955716866

U2 - 10.1016/j.nimb.2010.04.019

DO - 10.1016/j.nimb.2010.04.019

M3 - 文章

AN - SCOPUS:77955716866

SN - 0168-583X

VL - 268

SP - 2395

EP - 2399

JO - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

JF - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

IS - 15

ER -

Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this