Skip to main navigation Skip to search Skip to main content

Influence of DC-Joule heat on giant magneto-impedance of Co-based melt extraction wires

  • Shuling Zhang*
  • , Dawei Xing
  • , Huan Wang
  • , Xin Xin
  • , Sun Jianfei
  • *Corresponding author for this work
  • Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

Co68.25Fe4.5Sil2.25B15 naked amorphous wires of 60μm in diameter are prepared by melt extraction technology and annealed by DC-Joule heat at current from 40mA to 250mA for 10min. Impedance response is measured at low frequencies(<13MHz) using HP4192 impedance analyzer. We get better GMI effect by heating wires at 60mA and 180mA.The connection between GMI response and transformation of structure under different heat current has been discussed. After proper heat treatment, magneto impedance response is strong even at 0.5MHz with GMI amplitude of 193.1% and field sensitivity of 59.4%/Oe. The maximum ΔZ/Z reaches 476.9% and the largest field sensitivity is up to 91.8%/Oe. These results indicate proper annealed Co-based melt extraction wires are suitable for high sensitivity sensor applications.

Original languageEnglish
Title of host publicationMulti-Functional Materials and Structures II
Pages1615-1618
Number of pages4
DOIs
StatePublished - 2009
Event2nd International Conference on Multi-Functional Materials and Structures, MFMS-2009 - Qingdao, China
Duration: 9 Oct 200912 Oct 2009

Publication series

NameAdvanced Materials Research
Volume79-82
ISSN (Print)1022-6680

Conference

Conference2nd International Conference on Multi-Functional Materials and Structures, MFMS-2009
Country/TerritoryChina
CityQingdao
Period9/10/0912/10/09

Keywords

  • Amorphous wire
  • Anneal treatment
  • Gmi effect

Fingerprint

Dive into the research topics of 'Influence of DC-Joule heat on giant magneto-impedance of Co-based melt extraction wires'. Together they form a unique fingerprint.

Cite this