Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films

Ao pei Wang; Ming Feng; Wen Wang; Hai bo Li; Xue Zhao; Hang Xu; Hua Ke; Yu Zhou

doi:10.1007/s10854-018-9065-5

Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films

Ao pei Wang
, Ming Feng
, Wen Wang^*
, Hai bo Li
, Xue Zhao
, Hang Xu
, Hua Ke
, Yu Zhou

^*Corresponding author for this work

Harbin Institute of Technology
Jilin Normal University

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

Multiferroic 0.68Pb(Mg_1/3Nb_2/3)O₃–0.32PbTiO₃/CoFe₂O₄ (PMN–PT/CFO) composite films have been grown on Pt/Ti/SiO₂/Si substrate via sol–gel spin-coating technique. PMN–PT and CFO precursor solutions were mixed before the spin-coating process to optimize the interface interaction. We investigated the influence of the composition ratio and annealing process on the property of the multiferroic PMN–PT/CFO composite films. The films which entirely consist of PMN–PT and CFO phases have a good performance in the ferroelectric, ferromagnetic property and direct magnetoelectric coupling effect when they were annealed at 730 °C and air atmosphere. It was obviously noticed that the composition ratio between PMN–PT and CFO has an effect on the properties of PMN–PT/CFO multiferroic composites.

Original language	English
Pages (from-to)	10164-10169
Number of pages	6
Journal	Journal of Materials Science: Materials in Electronics
Volume	29
Issue number	12
DOIs	https://doi.org/10.1007/s10854-018-9065-5
State	Published - 1 Jun 2018
Externally published	Yes

Access to Document

10.1007/s10854-018-9065-5

Cite this

@article{7aeb498c47ba4730a4a7799ce0870015,

title = "Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films",

abstract = "Multiferroic 0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3/CoFe2O4 (PMN–PT/CFO) composite films have been grown on Pt/Ti/SiO2/Si substrate via sol–gel spin-coating technique. PMN–PT and CFO precursor solutions were mixed before the spin-coating process to optimize the interface interaction. We investigated the influence of the composition ratio and annealing process on the property of the multiferroic PMN–PT/CFO composite films. The films which entirely consist of PMN–PT and CFO phases have a good performance in the ferroelectric, ferromagnetic property and direct magnetoelectric coupling effect when they were annealed at 730 °C and air atmosphere. It was obviously noticed that the composition ratio between PMN–PT and CFO has an effect on the properties of PMN–PT/CFO multiferroic composites.",

author = "Wang, \{Ao pei\} and Ming Feng and Wen Wang and Li, \{Hai bo\} and Xue Zhao and Hang Xu and Hua Ke and Yu Zhou",

note = "Publisher Copyright: {\textcopyright} 2018, Springer Science+Business Media, LLC, part of Springer Nature.",

year = "2018",

month = jun,

day = "1",

doi = "10.1007/s10854-018-9065-5",

language = "英语",

volume = "29",

pages = "10164--10169",

journal = "Journal of Materials Science: Materials in Electronics",

issn = "0957-4522",

publisher = "Springer New York",

number = "12",

}

TY - JOUR

T1 - Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films

AU - Wang, Ao pei

AU - Feng, Ming

AU - Wang, Wen

AU - Li, Hai bo

AU - Zhao, Xue

AU - Xu, Hang

AU - Ke, Hua

AU - Zhou, Yu

PY - 2018/6/1

Y1 - 2018/6/1

N2 - Multiferroic 0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3/CoFe2O4 (PMN–PT/CFO) composite films have been grown on Pt/Ti/SiO2/Si substrate via sol–gel spin-coating technique. PMN–PT and CFO precursor solutions were mixed before the spin-coating process to optimize the interface interaction. We investigated the influence of the composition ratio and annealing process on the property of the multiferroic PMN–PT/CFO composite films. The films which entirely consist of PMN–PT and CFO phases have a good performance in the ferroelectric, ferromagnetic property and direct magnetoelectric coupling effect when they were annealed at 730 °C and air atmosphere. It was obviously noticed that the composition ratio between PMN–PT and CFO has an effect on the properties of PMN–PT/CFO multiferroic composites.

AB - Multiferroic 0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3/CoFe2O4 (PMN–PT/CFO) composite films have been grown on Pt/Ti/SiO2/Si substrate via sol–gel spin-coating technique. PMN–PT and CFO precursor solutions were mixed before the spin-coating process to optimize the interface interaction. We investigated the influence of the composition ratio and annealing process on the property of the multiferroic PMN–PT/CFO composite films. The films which entirely consist of PMN–PT and CFO phases have a good performance in the ferroelectric, ferromagnetic property and direct magnetoelectric coupling effect when they were annealed at 730 °C and air atmosphere. It was obviously noticed that the composition ratio between PMN–PT and CFO has an effect on the properties of PMN–PT/CFO multiferroic composites.

UR - https://www.scopus.com/pages/publications/85045138822

U2 - 10.1007/s10854-018-9065-5

DO - 10.1007/s10854-018-9065-5

M3 - 文章

AN - SCOPUS:85045138822

SN - 0957-4522

VL - 29

SP - 10164

EP - 10169

JO - Journal of Materials Science: Materials in Electronics

JF - Journal of Materials Science: Materials in Electronics

IS - 12

ER -

Influence of composition ratio on ferroelectric, magnetic and magnetoelectric properties of PMN–PT/CFO composite thin films

Abstract

Access to Document

Other files and links

Fingerprint

Cite this