Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite

Haibo Feng; Dechang Jia; Yu Zhou

doi:10.1016/j.jmatprotec.2006.07.014

Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite

Haibo Feng^*
, Dechang Jia
, Yu Zhou

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

Abstract

A blended elemental (BE) route was used to mix, uniformly distributed FeMo and B or TiB₂ particles into titanium powder by ball milling. The work presented here has demonstrated the influences of milling time, different powder mixture, process control agent (PCA), and size of milling ball and rotated speed on BE powder for reaction sintering of the TiB/Ti-4.0Fe-7.3Mo composite. The as milled powders were investigated by XRD analysis and SEM observation. The in situ reaction synthesized TiB reinforced Ti matrix composite has been successful prepared by ball milling and hot press sintering.

Original language	English
Pages (from-to)	79-83
Number of pages	5
Journal	Journal of Materials Processing Technology
Volume	182
Issue number	1-3
DOIs	https://doi.org/10.1016/j.jmatprotec.2006.07.014
State	Published - 2 Feb 2007
Externally published	Yes

Keywords

Ball milling
Blended elemental
Microstructure
Powder

Access to Document

10.1016/j.jmatprotec.2006.07.014

Cite this

@article{358ceabe70774664ab80defd3223e353,

title = "Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite",

abstract = "A blended elemental (BE) route was used to mix, uniformly distributed FeMo and B or TiB2 particles into titanium powder by ball milling. The work presented here has demonstrated the influences of milling time, different powder mixture, process control agent (PCA), and size of milling ball and rotated speed on BE powder for reaction sintering of the TiB/Ti-4.0Fe-7.3Mo composite. The as milled powders were investigated by XRD analysis and SEM observation. The in situ reaction synthesized TiB reinforced Ti matrix composite has been successful prepared by ball milling and hot press sintering.",

keywords = "Ball milling, Blended elemental, Microstructure, Powder",

author = "Haibo Feng and Dechang Jia and Yu Zhou",

year = "2007",

month = feb,

day = "2",

doi = "10.1016/j.jmatprotec.2006.07.014",

language = "英语",

volume = "182",

pages = "79--83",

journal = "Journal of Materials Processing Technology",

issn = "0924-0136",

publisher = "Elsevier Ltd",

number = "1-3",

}

TY - JOUR

T1 - Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite

AU - Feng, Haibo

AU - Jia, Dechang

AU - Zhou, Yu

PY - 2007/2/2

Y1 - 2007/2/2

N2 - A blended elemental (BE) route was used to mix, uniformly distributed FeMo and B or TiB2 particles into titanium powder by ball milling. The work presented here has demonstrated the influences of milling time, different powder mixture, process control agent (PCA), and size of milling ball and rotated speed on BE powder for reaction sintering of the TiB/Ti-4.0Fe-7.3Mo composite. The as milled powders were investigated by XRD analysis and SEM observation. The in situ reaction synthesized TiB reinforced Ti matrix composite has been successful prepared by ball milling and hot press sintering.

AB - A blended elemental (BE) route was used to mix, uniformly distributed FeMo and B or TiB2 particles into titanium powder by ball milling. The work presented here has demonstrated the influences of milling time, different powder mixture, process control agent (PCA), and size of milling ball and rotated speed on BE powder for reaction sintering of the TiB/Ti-4.0Fe-7.3Mo composite. The as milled powders were investigated by XRD analysis and SEM observation. The in situ reaction synthesized TiB reinforced Ti matrix composite has been successful prepared by ball milling and hot press sintering.

KW - Ball milling

KW - Blended elemental

KW - Microstructure

KW - Powder

UR - https://www.scopus.com/pages/publications/33750625426

U2 - 10.1016/j.jmatprotec.2006.07.014

DO - 10.1016/j.jmatprotec.2006.07.014

M3 - 文章

AN - SCOPUS:33750625426

SN - 0924-0136

VL - 182

SP - 79

EP - 83

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

IS - 1-3

ER -

Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this