High spindle speed micro EDM using electrostatic induction feeding method

Tomohiro Koyano; Yuna Yahagi; Masanori Kunieda; Xiaodong Yang

High spindle speed micro EDM using electrostatic induction feeding method

Tomohiro Koyano
, Yuna Yahagi
, Masanori Kunieda
, Xiaodong Yang

School of Mechatronics Engineering

Tokyo University of Agriculture and Technology

Research output: Contribution to conference › Paper › peer-review

5 Scopus citations

Abstract

This paper describes the influences of high spindle speed on machining characteristics of micro EDM. In the case of the conventional relaxation pulse generator, it is difficult to supply electric power to the high speed spindle without causing run-out of the spindle because of the necessity to use an electric brush. Thus the electrostatic induction feeding method which enables non-contact electric feeding to the high speed spindle was newly developed. Machining results using the spindle speed up to 20 000 rpm show that the material removal rate increases with increasing the spindle speed.

Original language	English
Pages	599-602
Number of pages	4
State	Published - 2010
Event	16th International Symposium on Electromachining, ISEM 2010 - Shanghai, China Duration: 19 Apr 2010 → 23 Apr 2010

Conference

Conference	16th International Symposium on Electromachining, ISEM 2010
Country/Territory	China
City	Shanghai
Period	19/04/10 → 23/04/10

Keywords

Electrostatic induction feeding
High speed spindle
Material removal rate
Micro EDM

Cite this

@conference{2375467cbe02427f869633eed609dd5b,

title = "High spindle speed micro EDM using electrostatic induction feeding method",

abstract = "This paper describes the influences of high spindle speed on machining characteristics of micro EDM. In the case of the conventional relaxation pulse generator, it is difficult to supply electric power to the high speed spindle without causing run-out of the spindle because of the necessity to use an electric brush. Thus the electrostatic induction feeding method which enables non-contact electric feeding to the high speed spindle was newly developed. Machining results using the spindle speed up to 20 000 rpm show that the material removal rate increases with increasing the spindle speed.",

keywords = "Electrostatic induction feeding, High speed spindle, Material removal rate, Micro EDM",

author = "Tomohiro Koyano and Yuna Yahagi and Masanori Kunieda and Xiaodong Yang",

year = "2010",

language = "英语",

pages = "599--602",

note = "16th International Symposium on Electromachining, ISEM 2010 ; Conference date: 19-04-2010 Through 23-04-2010",

}

TY - CONF

T1 - High spindle speed micro EDM using electrostatic induction feeding method

AU - Koyano, Tomohiro

AU - Yahagi, Yuna

AU - Kunieda, Masanori

AU - Yang, Xiaodong

PY - 2010

Y1 - 2010

N2 - This paper describes the influences of high spindle speed on machining characteristics of micro EDM. In the case of the conventional relaxation pulse generator, it is difficult to supply electric power to the high speed spindle without causing run-out of the spindle because of the necessity to use an electric brush. Thus the electrostatic induction feeding method which enables non-contact electric feeding to the high speed spindle was newly developed. Machining results using the spindle speed up to 20 000 rpm show that the material removal rate increases with increasing the spindle speed.

AB - This paper describes the influences of high spindle speed on machining characteristics of micro EDM. In the case of the conventional relaxation pulse generator, it is difficult to supply electric power to the high speed spindle without causing run-out of the spindle because of the necessity to use an electric brush. Thus the electrostatic induction feeding method which enables non-contact electric feeding to the high speed spindle was newly developed. Machining results using the spindle speed up to 20 000 rpm show that the material removal rate increases with increasing the spindle speed.

KW - Electrostatic induction feeding

KW - High speed spindle

KW - Material removal rate

KW - Micro EDM

UR - https://www.scopus.com/pages/publications/84907327399

M3 - 论文

AN - SCOPUS:84907327399

SP - 599

EP - 602

T2 - 16th International Symposium on Electromachining, ISEM 2010

Y2 - 19 April 2010 through 23 April 2010

ER -

High spindle speed micro EDM using electrostatic induction feeding method

Abstract

Conference

Keywords

Other files and links

Fingerprint

Cite this