Heat transfer modeling of a high-temperature porous-medium filled solar thermochemical reactor for hydrogen and synthesis gas production

In this paper, heat transfer modeling of a high-temperature porous-medium filled solar thermochemical reactor for hydrogen and synthesis gas production is investigated. The numerical simulation is performed using a three-dimensional (3D) numerical model and surface-to-surface radiation model coupled to Rosseland approximation for radiation heat transfer. The effects of operating conditions and the porous structural parameters on the reactor thermal performance were investigated significantly. It was found that large axial temperature gradient and high-temperature distribution throughout the reactor were strongly dependent on the operating conditions. The inlet gas temperature has remarkable effects on the temperature distribution. The thermal performance of porous-medium filled solar thermochemical reactor could be improved by preheating the inlet gas up to 393.15 K. Moreover, a correlation was established between the protective gas inlet velocity and the porosity of porous media. The temperature difference decreased with the increase in the porosity of the inner cavity of the reactor. In contrast to the front and back parts of the inner cavity of the reactor, higher temperature distribution could be obtained in the porous region by increasing the average cell diameters of porous media.