Hardware design of passive acoustic source localization system based on a five-element cross microphone array

Yue Kan; Pengfei Wang; Fusheng Zha; Mantian Li

doi:10.1109/ICSPCC.2014.6986156

Hardware design of passive acoustic source localization system based on a five-element cross microphone array

Yue Kan
, Pengfei Wang
, Fusheng Zha^*
, Mantian Li

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

Passive acoustic source localization system increasingly becomes small and portable with the rapid development of the computer technology, integrated circuit, microelectronics technology and embedded system, et al. In this sense, we complete the hardware design of a small portable passive acoustic source localization system based on a five-element cross microphone array. In the conditions of meeting the system sampling requirements, the established system hardware is simple, small and portable, as well as the total size of the signal preprocessing and control part is only 15.3 × 22.5 (cm). The hardware part mainly includes the design of the five-element cross microphone array, signal preprocessing circuit and micro controller unit (MCU). Finally, circuit testing and zero input calibration show that the whole hardware part not only is feasible but also has good performance.

Original language	English
Title of host publication	2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	80-83
Number of pages	4
ISBN (Electronic)	9781479952748
DOIs	https://doi.org/10.1109/ICSPCC.2014.6986156
State	Published - 15 Dec 2014
Event	2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014 - Guilin, Guangxi, China Duration: 5 Aug 2014 → 8 Aug 2014

Publication series

Name	2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014

Conference

Conference	2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014
Country/Territory	China
City	Guilin, Guangxi
Period	5/08/14 → 8/08/14

Keywords

MSP430F149 MCU
Passive acoustic source localization system
UART serial port
five-element cross microphone array
signal preprocessing circuit

Access to Document

10.1109/ICSPCC.2014.6986156

Cite this

Kan, Y., Wang, P., Zha, F., & Li, M. (2014). Hardware design of passive acoustic source localization system based on a five-element cross microphone array. In 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014 (pp. 80-83). Article 6986156 (2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICSPCC.2014.6986156

Kan, Yue ; Wang, Pengfei ; Zha, Fusheng et al. / Hardware design of passive acoustic source localization system based on a five-element cross microphone array. 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 80-83 (2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014).

@inproceedings{dca0c097a93e4d6fae7d21d2dfe61d28,

title = "Hardware design of passive acoustic source localization system based on a five-element cross microphone array",

abstract = "Passive acoustic source localization system increasingly becomes small and portable with the rapid development of the computer technology, integrated circuit, microelectronics technology and embedded system, et al. In this sense, we complete the hardware design of a small portable passive acoustic source localization system based on a five-element cross microphone array. In the conditions of meeting the system sampling requirements, the established system hardware is simple, small and portable, as well as the total size of the signal preprocessing and control part is only 15.3 × 22.5 (cm). The hardware part mainly includes the design of the five-element cross microphone array, signal preprocessing circuit and micro controller unit (MCU). Finally, circuit testing and zero input calibration show that the whole hardware part not only is feasible but also has good performance.",

keywords = "MSP430F149 MCU, Passive acoustic source localization system, UART serial port, five-element cross microphone array, signal preprocessing circuit",

author = "Yue Kan and Pengfei Wang and Fusheng Zha and Mantian Li",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014 ; Conference date: 05-08-2014 Through 08-08-2014",

year = "2014",

month = dec,

day = "15",

doi = "10.1109/ICSPCC.2014.6986156",

language = "英语",

series = "2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "80--83",

booktitle = "2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014",

address = "美国",

}

Kan, Y, Wang, P , Zha, F & Li, M 2014, Hardware design of passive acoustic source localization system based on a five-element cross microphone array. in 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014., 6986156, 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014, Institute of Electrical and Electronics Engineers Inc., pp. 80-83, 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014, Guilin, Guangxi, China, 5/08/14. https://doi.org/10.1109/ICSPCC.2014.6986156

Hardware design of passive acoustic source localization system based on a five-element cross microphone array. / Kan, Yue; Wang, Pengfei ; Zha, Fusheng et al.
2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 80-83 6986156 (2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Hardware design of passive acoustic source localization system based on a five-element cross microphone array

AU - Kan, Yue

AU - Wang, Pengfei

AU - Zha, Fusheng

AU - Li, Mantian

PY - 2014/12/15

Y1 - 2014/12/15

N2 - Passive acoustic source localization system increasingly becomes small and portable with the rapid development of the computer technology, integrated circuit, microelectronics technology and embedded system, et al. In this sense, we complete the hardware design of a small portable passive acoustic source localization system based on a five-element cross microphone array. In the conditions of meeting the system sampling requirements, the established system hardware is simple, small and portable, as well as the total size of the signal preprocessing and control part is only 15.3 × 22.5 (cm). The hardware part mainly includes the design of the five-element cross microphone array, signal preprocessing circuit and micro controller unit (MCU). Finally, circuit testing and zero input calibration show that the whole hardware part not only is feasible but also has good performance.

AB - Passive acoustic source localization system increasingly becomes small and portable with the rapid development of the computer technology, integrated circuit, microelectronics technology and embedded system, et al. In this sense, we complete the hardware design of a small portable passive acoustic source localization system based on a five-element cross microphone array. In the conditions of meeting the system sampling requirements, the established system hardware is simple, small and portable, as well as the total size of the signal preprocessing and control part is only 15.3 × 22.5 (cm). The hardware part mainly includes the design of the five-element cross microphone array, signal preprocessing circuit and micro controller unit (MCU). Finally, circuit testing and zero input calibration show that the whole hardware part not only is feasible but also has good performance.

KW - MSP430F149 MCU

KW - Passive acoustic source localization system

KW - UART serial port

KW - five-element cross microphone array

KW - signal preprocessing circuit

UR - https://www.scopus.com/pages/publications/84922608459

U2 - 10.1109/ICSPCC.2014.6986156

DO - 10.1109/ICSPCC.2014.6986156

M3 - 会议稿件

AN - SCOPUS:84922608459

T3 - 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014

SP - 80

EP - 83

BT - 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014

Y2 - 5 August 2014 through 8 August 2014

ER -

Kan Y, Wang P , Zha F, Li M. Hardware design of passive acoustic source localization system based on a five-element cross microphone array. In 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 80-83. 6986156. (2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014). doi: 10.1109/ICSPCC.2014.6986156

Hardware design of passive acoustic source localization system based on a five-element cross microphone array

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this