Grid connected converter impedance calculation under virtual synchronous machine control

Rongfeng Yang; Lei Li; Carlo Cecati; Yannan Yu; Dianguo Xu

doi:10.1109/ICIT.2016.7474803

Grid connected converter impedance calculation under virtual synchronous machine control

Rongfeng Yang
, Lei Li
, Carlo Cecati
, Yannan Yu
, Dianguo Xu

School of Electrical Engineering and Automation, Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

This paper presents a converter impedance calculation method under virtual synchronous machine (VSM) control. Firstly, the conventional virtual synchronous machine control strategy is presented, in which the active and reactive power control is realized. Secondly, the small signal model with VSM control is deduced, thus a calculation method for impedance in d-q frame is proposed. The effect produced by voltage and frequency adjustment in VSM control to d-q frame voltage is fully analyzed. This method also extends to capacitor voltage close loop control for static var compensation field. At last, the calculated impedance is compared with the measured impedance using Matlab/Simulink. Results validate the correctness of the proposed impedance calculation method.

Original language	English
Title of host publication	Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	511-516
Number of pages	6
ISBN (Electronic)	9781467380751
DOIs	https://doi.org/10.1109/ICIT.2016.7474803
State	Published - 19 May 2016
Externally published	Yes
Event	IEEE International Conference on Industrial Technology, ICIT 2016 - Taipei, Taiwan, Province of China Duration: 14 Mar 2016 → 17 Mar 2016

Publication series

Name	Proceedings of the IEEE International Conference on Industrial Technology
Volume	2016-May

Conference

Conference	IEEE International Conference on Industrial Technology, ICIT 2016
Country/Territory	Taiwan, Province of China
City	Taipei
Period	14/03/16 → 17/03/16

Keywords

impedance calculation
stability analysis
virtual synchronous machine

Access to Document

10.1109/ICIT.2016.7474803

Cite this

Yang, R., Li, L., Cecati, C., Yu, Y., & Xu, D. (2016). Grid connected converter impedance calculation under virtual synchronous machine control. In Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016 (pp. 511-516). Article 7474803 (Proceedings of the IEEE International Conference on Industrial Technology; Vol. 2016-May). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIT.2016.7474803

Yang, Rongfeng ; Li, Lei ; Cecati, Carlo et al. / Grid connected converter impedance calculation under virtual synchronous machine control. Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 511-516 (Proceedings of the IEEE International Conference on Industrial Technology).

@inproceedings{3809c66fff474d2196644b31c50b002e,

title = "Grid connected converter impedance calculation under virtual synchronous machine control",

abstract = "This paper presents a converter impedance calculation method under virtual synchronous machine (VSM) control. Firstly, the conventional virtual synchronous machine control strategy is presented, in which the active and reactive power control is realized. Secondly, the small signal model with VSM control is deduced, thus a calculation method for impedance in d-q frame is proposed. The effect produced by voltage and frequency adjustment in VSM control to d-q frame voltage is fully analyzed. This method also extends to capacitor voltage close loop control for static var compensation field. At last, the calculated impedance is compared with the measured impedance using Matlab/Simulink. Results validate the correctness of the proposed impedance calculation method.",

keywords = "impedance calculation, stability analysis, virtual synchronous machine",

author = "Rongfeng Yang and Lei Li and Carlo Cecati and Yannan Yu and Dianguo Xu",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; IEEE International Conference on Industrial Technology, ICIT 2016 ; Conference date: 14-03-2016 Through 17-03-2016",

year = "2016",

month = may,

day = "19",

doi = "10.1109/ICIT.2016.7474803",

language = "英语",

series = "Proceedings of the IEEE International Conference on Industrial Technology",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "511--516",

booktitle = "Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016",

address = "美国",

}

Yang, R, Li, L, Cecati, C, Yu, Y & Xu, D 2016, Grid connected converter impedance calculation under virtual synchronous machine control. in Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016., 7474803, Proceedings of the IEEE International Conference on Industrial Technology, vol. 2016-May, Institute of Electrical and Electronics Engineers Inc., pp. 511-516, IEEE International Conference on Industrial Technology, ICIT 2016, Taipei, Taiwan, Province of China, 14/03/16. https://doi.org/10.1109/ICIT.2016.7474803

Grid connected converter impedance calculation under virtual synchronous machine control. / Yang, Rongfeng; Li, Lei; Cecati, Carlo et al.
Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., 2016. p. 511-516 7474803 (Proceedings of the IEEE International Conference on Industrial Technology; Vol. 2016-May).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Grid connected converter impedance calculation under virtual synchronous machine control

AU - Yang, Rongfeng

AU - Li, Lei

AU - Cecati, Carlo

AU - Yu, Yannan

AU - Xu, Dianguo

PY - 2016/5/19

Y1 - 2016/5/19

N2 - This paper presents a converter impedance calculation method under virtual synchronous machine (VSM) control. Firstly, the conventional virtual synchronous machine control strategy is presented, in which the active and reactive power control is realized. Secondly, the small signal model with VSM control is deduced, thus a calculation method for impedance in d-q frame is proposed. The effect produced by voltage and frequency adjustment in VSM control to d-q frame voltage is fully analyzed. This method also extends to capacitor voltage close loop control for static var compensation field. At last, the calculated impedance is compared with the measured impedance using Matlab/Simulink. Results validate the correctness of the proposed impedance calculation method.

AB - This paper presents a converter impedance calculation method under virtual synchronous machine (VSM) control. Firstly, the conventional virtual synchronous machine control strategy is presented, in which the active and reactive power control is realized. Secondly, the small signal model with VSM control is deduced, thus a calculation method for impedance in d-q frame is proposed. The effect produced by voltage and frequency adjustment in VSM control to d-q frame voltage is fully analyzed. This method also extends to capacitor voltage close loop control for static var compensation field. At last, the calculated impedance is compared with the measured impedance using Matlab/Simulink. Results validate the correctness of the proposed impedance calculation method.

KW - impedance calculation

KW - stability analysis

KW - virtual synchronous machine

UR - https://www.scopus.com/pages/publications/84974604286

U2 - 10.1109/ICIT.2016.7474803

DO - 10.1109/ICIT.2016.7474803

M3 - 会议稿件

AN - SCOPUS:84974604286

T3 - Proceedings of the IEEE International Conference on Industrial Technology

SP - 511

EP - 516

BT - Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - IEEE International Conference on Industrial Technology, ICIT 2016

Y2 - 14 March 2016 through 17 March 2016

ER -

Yang R, Li L, Cecati C, Yu Y, Xu D. Grid connected converter impedance calculation under virtual synchronous machine control. In Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 511-516. 7474803. (Proceedings of the IEEE International Conference on Industrial Technology). doi: 10.1109/ICIT.2016.7474803

Grid connected converter impedance calculation under virtual synchronous machine control

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this