Graded structure of laser direct manufacturing bulk metallic glass

Yunzhuo Lu; Yongjiang Huang; Jing Wu; Xing Lu; Zuoxiang Qin; Dominik Daisenberger; Yu Lung Chiu

doi:10.1016/j.intermet.2018.10.005

Graded structure of laser direct manufacturing bulk metallic glass

Yunzhuo Lu^*
, Yongjiang Huang
, Jing Wu
, Xing Lu
, Zuoxiang Qin
, Dominik Daisenberger
, Yu Lung Chiu

^*Corresponding author for this work

Dalian Jiaotong University
Harbin Institute of Technology
University of Birmingham
Diamond Light Source

Research output: Contribution to journal › Article › peer-review

33 Scopus citations

Abstract

Extending the applications of metallic glasses for use as functionally graded materials could mitigate their intrinsic problems such as limited dimensions. Laser direct manufacturing (LDM) technology is an outstanding and reliable technique to fabricate structural-graded materials. Here, a Zr₅₀Ti₅Cu₂₇Ni₁₀Al₈ (Zr50) alloy was chosen as the model material to fabricate metallic glass by the LDM. By optimizing the LDM process through the finite-element simulation, a nearly fully amorphous Zr50 alloy with the thickness of larger than 10 mm was fabricated. The structural gradients, induced by gradual variation of crystallinity, were found in the deposited Zr50 metallic glass.

Original language	English
Pages (from-to)	67-71
Number of pages	5
Journal	Intermetallics
Volume	103
DOIs	https://doi.org/10.1016/j.intermet.2018.10.005
State	Published - Dec 2018
Externally published	Yes

Keywords

Amorphous materials
Bulk metallic glass
Functionally graded materials
Laser deposition
Laser direct manufacturing

Access to Document

10.1016/j.intermet.2018.10.005

Cite this

@article{f212b659fb15486fbe1bf73552f033d2,

title = "Graded structure of laser direct manufacturing bulk metallic glass",

abstract = "Extending the applications of metallic glasses for use as functionally graded materials could mitigate their intrinsic problems such as limited dimensions. Laser direct manufacturing (LDM) technology is an outstanding and reliable technique to fabricate structural-graded materials. Here, a Zr50Ti5Cu27Ni10Al8 (Zr50) alloy was chosen as the model material to fabricate metallic glass by the LDM. By optimizing the LDM process through the finite-element simulation, a nearly fully amorphous Zr50 alloy with the thickness of larger than 10 mm was fabricated. The structural gradients, induced by gradual variation of crystallinity, were found in the deposited Zr50 metallic glass.",

keywords = "Amorphous materials, Bulk metallic glass, Functionally graded materials, Laser deposition, Laser direct manufacturing",

author = "Yunzhuo Lu and Yongjiang Huang and Jing Wu and Xing Lu and Zuoxiang Qin and Dominik Daisenberger and Chiu, \{Yu Lung\}",

note = "Publisher Copyright: {\textcopyright} 2018 Elsevier Ltd",

year = "2018",

month = dec,

doi = "10.1016/j.intermet.2018.10.005",

language = "英语",

volume = "103",

pages = "67--71",

journal = "Intermetallics",

issn = "0966-9795",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Graded structure of laser direct manufacturing bulk metallic glass

AU - Lu, Yunzhuo

AU - Huang, Yongjiang

AU - Wu, Jing

AU - Lu, Xing

AU - Qin, Zuoxiang

AU - Daisenberger, Dominik

AU - Chiu, Yu Lung

PY - 2018/12

Y1 - 2018/12

N2 - Extending the applications of metallic glasses for use as functionally graded materials could mitigate their intrinsic problems such as limited dimensions. Laser direct manufacturing (LDM) technology is an outstanding and reliable technique to fabricate structural-graded materials. Here, a Zr50Ti5Cu27Ni10Al8 (Zr50) alloy was chosen as the model material to fabricate metallic glass by the LDM. By optimizing the LDM process through the finite-element simulation, a nearly fully amorphous Zr50 alloy with the thickness of larger than 10 mm was fabricated. The structural gradients, induced by gradual variation of crystallinity, were found in the deposited Zr50 metallic glass.

AB - Extending the applications of metallic glasses for use as functionally graded materials could mitigate their intrinsic problems such as limited dimensions. Laser direct manufacturing (LDM) technology is an outstanding and reliable technique to fabricate structural-graded materials. Here, a Zr50Ti5Cu27Ni10Al8 (Zr50) alloy was chosen as the model material to fabricate metallic glass by the LDM. By optimizing the LDM process through the finite-element simulation, a nearly fully amorphous Zr50 alloy with the thickness of larger than 10 mm was fabricated. The structural gradients, induced by gradual variation of crystallinity, were found in the deposited Zr50 metallic glass.

KW - Amorphous materials

KW - Bulk metallic glass

KW - Functionally graded materials

KW - Laser deposition

KW - Laser direct manufacturing

UR - https://www.scopus.com/pages/publications/85054584538

U2 - 10.1016/j.intermet.2018.10.005

DO - 10.1016/j.intermet.2018.10.005

M3 - 文章

AN - SCOPUS:85054584538

SN - 0966-9795

VL - 103

SP - 67

EP - 71

JO - Intermetallics

JF - Intermetallics

ER -

Graded structure of laser direct manufacturing bulk metallic glass

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this