Skip to main navigation Skip to search Skip to main content

Fouling potentials and properties of foulants in an innovative algal-sludge membrane bioreactor

  • Li Sun
  • , Yu Tian*
  • , Hui Li
  • , Qiong Wang
  • *Corresponding author for this work
  • Guangdong University of Technology
  • Southern Marine Science and Engineering Guangdong Laboratory
  • School of Environment, Harbin Institute of Technology
  • Hebei University
  • Zhengzhou University of Light Industry

Research output: Contribution to journalArticlepeer-review

Abstract

This study focused on the effect of algae on the fouling potential and dynamic fouling variation of foulants in an innovative algal-sludge membrane bioreactor (AS-MBR). Filtration experiments revealed that the soluble extracellular polymeric substance (S-EPS) released by the algal-sludge flocs showed a slower diminishing rate of flux than that released by the sludge flocs. The intermediate blocking and cake filtration models demonstrated the major mechanisms, which implied a reduction in the driving force of pore blocking and fouling layer formation induced by the algal-bacterial S-EPS. Furthermore, the relative flux decrements of loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) in the AS-MBR were lower than those of the control without algae, indicating a reduction in the fouling potential of the bound EPS (B-EPS) in the algal-sludge flocs compared to the control. This could be attributed to the reduction in the membrane intercepts for LB- and TB-EPS, respectively. Specifically, S-EPS and B-EPS released by algal-sludge flocs had a lower free energy of cohesion (ΔGcoh) than those released by sludge flocs (decreased of 19.14%, 45.93%, and 43.34% for the S-EPS, LB-EPS, and TB-EPS, respectively). Furthermore, these changes could contribute to the decrease in the relative abundance of adsorbed polysaccharide- and protein-like substances in the B-EPS (released by algal-sludge flocs) filtration membrane, leading to the formation of less rough peaks and valleys in the fouling layer in the AS-MBR. Accordingly, the lower fouling propensity and weaker cohesion energy of S-EPS and B-EPS tend to decrease the hydrophobicity and the free energy of the floc surface and further provide less driving force to adhere to the membrane, resulting in significant mitigation of membrane fouling in the AS-MBR. Therefore, the overall fouling behavior caused by S-EPS, B-EPS and flocs should be comprehensively considered to achieve an underlying understanding of the algal effect on membrane fouling control.

Original languageEnglish
Article number106439
JournalEnvironment International
Volume151
DOIs
StatePublished - Jun 2021
Externally publishedYes

Keywords

  • Algal-sludge membrane bioreactor
  • Bound extracellular polymeric substance
  • Fouling potential
  • Interaction energy
  • Soluble extracellular polymeric substance

Fingerprint

Dive into the research topics of 'Fouling potentials and properties of foulants in an innovative algal-sludge membrane bioreactor'. Together they form a unique fingerprint.

Cite this