Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite

Kaifeng Zhang; Guofeng Wang; Zhenjie Wang; Changwen Wang; Wenbo Han

Fabrication and superplasticity of Al₂O₃/3Y-TZP laminated composite

Kaifeng Zhang^*
, Guofeng Wang
, Zhenjie Wang
, Changwen Wang
, Wenbo Han

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

Al₂O₃/3Y-TZP laminated composite was fabricated using the tape casting and hot-press sintering. The microstructure was observed by SEM. The as-received material was deep-drawn at high temperatures to research its superplasticity. The results show that the microstructure of the material sintered at 1550°C has fine grain and strong interfaces. When the strain rate is constant, the forming temperature has great influence on the superplasticity of Al₂O₃/3Y-TZP laminated composite. The greatest deformation height of deep-drawing was obtained at 1500°C. It is worse at higher or lower forming temperatures.

Original language	English
Pages (from-to)	64-69
Number of pages	6
Journal	Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica
Volume	22
Issue number	3
State	Published - Jun 2005
Externally published	Yes

Keywords

Deep-drawing
Hot-press sintering
Laminated ceramic matrix composites
Superplastic forming
Tape casting

Cite this

@article{0379f4f686dd43a3a724880c038f98e4,

title = "Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite",

abstract = "Al2O3/3Y-TZP laminated composite was fabricated using the tape casting and hot-press sintering. The microstructure was observed by SEM. The as-received material was deep-drawn at high temperatures to research its superplasticity. The results show that the microstructure of the material sintered at 1550°C has fine grain and strong interfaces. When the strain rate is constant, the forming temperature has great influence on the superplasticity of Al2O3/3Y-TZP laminated composite. The greatest deformation height of deep-drawing was obtained at 1500°C. It is worse at higher or lower forming temperatures.",

keywords = "Deep-drawing, Hot-press sintering, Laminated ceramic matrix composites, Superplastic forming, Tape casting",

author = "Kaifeng Zhang and Guofeng Wang and Zhenjie Wang and Changwen Wang and Wenbo Han",

year = "2005",

month = jun,

language = "英语",

volume = "22",

pages = "64--69",

journal = "Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica",

issn = "1000-3851",

publisher = "Beijing University of Aeronautics and Astronautics (BUAA)",

number = "3",

}

TY - JOUR

T1 - Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite

AU - Zhang, Kaifeng

AU - Wang, Guofeng

AU - Wang, Zhenjie

AU - Wang, Changwen

AU - Han, Wenbo

PY - 2005/6

Y1 - 2005/6

N2 - Al2O3/3Y-TZP laminated composite was fabricated using the tape casting and hot-press sintering. The microstructure was observed by SEM. The as-received material was deep-drawn at high temperatures to research its superplasticity. The results show that the microstructure of the material sintered at 1550°C has fine grain and strong interfaces. When the strain rate is constant, the forming temperature has great influence on the superplasticity of Al2O3/3Y-TZP laminated composite. The greatest deformation height of deep-drawing was obtained at 1500°C. It is worse at higher or lower forming temperatures.

AB - Al2O3/3Y-TZP laminated composite was fabricated using the tape casting and hot-press sintering. The microstructure was observed by SEM. The as-received material was deep-drawn at high temperatures to research its superplasticity. The results show that the microstructure of the material sintered at 1550°C has fine grain and strong interfaces. When the strain rate is constant, the forming temperature has great influence on the superplasticity of Al2O3/3Y-TZP laminated composite. The greatest deformation height of deep-drawing was obtained at 1500°C. It is worse at higher or lower forming temperatures.

KW - Deep-drawing

KW - Hot-press sintering

KW - Laminated ceramic matrix composites

KW - Superplastic forming

KW - Tape casting

UR - https://www.scopus.com/pages/publications/21144438761

M3 - 文章

AN - SCOPUS:21144438761

SN - 1000-3851

VL - 22

SP - 64

EP - 69

JO - Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica

JF - Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica

IS - 3

ER -

Fabrication and superplasticity of Al₂O₃/3Y-TZP laminated composite

Abstract

Keywords

Other files and links

Fingerprint

Cite this