Experimental investigation of double-clad Tm3+-doped silica fiber amplifying at 1.99μm

Tao Jing; Hanbin Wang; Yunjun Zhang

doi:10.1117/12.802505

Experimental investigation of double-clad Tm³⁺-doped silica fiber amplifying at 1.99μm

Tao Jing
, Hanbin Wang
, Yunjun Zhang^*

^*Corresponding author for this work

School of Astronautics

Quanzhou Normal University

Research output: Contribution to journal › Conference article › peer-review

Abstract

The LD-clad-pumped CW and Q-switched pulse Tm³⁺-doped silica fiber amplifiers were general experimental investigations. The CW fiber amplifier provided up to 3W output with the slope efficiency nearly 30%, and the Q-switched pulse fiber amplifier output power was 2W with the slope efficiency 32.6%. The gain fiber was 27.5/400μm D-shaped Tm³⁺-doped silica double-cladding fiber, and the pump sources was a 792nm LD with a 400μm pigtail fiber output. The signal seed sources was a LD-pumped Tm ³⁺:YAP lasing at 1.99μm. By the AO Q-switched method, The Tm ³⁺:YAP laser had a nearly 120ns pulse duration and 1kHz repeat rates. The measured amplified spectrum only stretched a little relative to the input signal spectrum.

Original language	English
Article number	71342G
Journal	Proceedings of SPIE - The International Society for Optical Engineering
Volume	7134
DOIs	https://doi.org/10.1117/12.802505
State	Published - 2008
Event	Passive Components and Fiber-based Devices V - Hangzhou, China Duration: 27 Oct 2008 → 30 Oct 2008

Keywords

Clad-pumped
Fiber amplifier
Tm-doped fiber

Access to Document

10.1117/12.802505

Cite this

@article{f02020fdf04340ba88645299b2f293ff,

title = "Experimental investigation of double-clad Tm3+-doped silica fiber amplifying at 1.99μm",

abstract = "The LD-clad-pumped CW and Q-switched pulse Tm3+-doped silica fiber amplifiers were general experimental investigations. The CW fiber amplifier provided up to 3W output with the slope efficiency nearly 30\%, and the Q-switched pulse fiber amplifier output power was 2W with the slope efficiency 32.6\%. The gain fiber was 27.5/400μm D-shaped Tm3+-doped silica double-cladding fiber, and the pump sources was a 792nm LD with a 400μm pigtail fiber output. The signal seed sources was a LD-pumped Tm 3+:YAP lasing at 1.99μm. By the AO Q-switched method, The Tm 3+:YAP laser had a nearly 120ns pulse duration and 1kHz repeat rates. The measured amplified spectrum only stretched a little relative to the input signal spectrum.",

keywords = "Clad-pumped, Fiber amplifier, Tm-doped fiber",

author = "Tao Jing and Hanbin Wang and Yunjun Zhang",

year = "2008",

doi = "10.1117/12.802505",

language = "英语",

volume = "7134",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

note = "Passive Components and Fiber-based Devices V ; Conference date: 27-10-2008 Through 30-10-2008",

}

TY - JOUR

T1 - Experimental investigation of double-clad Tm3+-doped silica fiber amplifying at 1.99μm

AU - Jing, Tao

AU - Wang, Hanbin

AU - Zhang, Yunjun

PY - 2008

Y1 - 2008

N2 - The LD-clad-pumped CW and Q-switched pulse Tm3+-doped silica fiber amplifiers were general experimental investigations. The CW fiber amplifier provided up to 3W output with the slope efficiency nearly 30%, and the Q-switched pulse fiber amplifier output power was 2W with the slope efficiency 32.6%. The gain fiber was 27.5/400μm D-shaped Tm3+-doped silica double-cladding fiber, and the pump sources was a 792nm LD with a 400μm pigtail fiber output. The signal seed sources was a LD-pumped Tm 3+:YAP lasing at 1.99μm. By the AO Q-switched method, The Tm 3+:YAP laser had a nearly 120ns pulse duration and 1kHz repeat rates. The measured amplified spectrum only stretched a little relative to the input signal spectrum.

AB - The LD-clad-pumped CW and Q-switched pulse Tm3+-doped silica fiber amplifiers were general experimental investigations. The CW fiber amplifier provided up to 3W output with the slope efficiency nearly 30%, and the Q-switched pulse fiber amplifier output power was 2W with the slope efficiency 32.6%. The gain fiber was 27.5/400μm D-shaped Tm3+-doped silica double-cladding fiber, and the pump sources was a 792nm LD with a 400μm pigtail fiber output. The signal seed sources was a LD-pumped Tm 3+:YAP lasing at 1.99μm. By the AO Q-switched method, The Tm 3+:YAP laser had a nearly 120ns pulse duration and 1kHz repeat rates. The measured amplified spectrum only stretched a little relative to the input signal spectrum.

KW - Clad-pumped

KW - Fiber amplifier

KW - Tm-doped fiber

UR - https://www.scopus.com/pages/publications/62449178176

U2 - 10.1117/12.802505

DO - 10.1117/12.802505

M3 - 会议文章

AN - SCOPUS:62449178176

SN - 0277-786X

VL - 7134

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

M1 - 71342G

T2 - Passive Components and Fiber-based Devices V

Y2 - 27 October 2008 through 30 October 2008

ER -

Experimental investigation of double-clad Tm³⁺-doped silica fiber amplifying at 1.99μm

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this